Number of managed devices reported for DCR slave RME is greater than the total number of devices in the DCR.See attached screen shots.
Number of managed devices reported for DCR slave RME is greater than the total number of devices in the DCR.See attached screen shots.
LMS is getting Configuration backup failed for the last few days.Please find the attachment.
I recently upgraded to LMS 3.2 with RME 4.3.1. I don't have the option to create ad hoc jobs and I don't see any system tasks available. The tasks folder expands to reveal nothing. Any ideas?
Hi, I'm running ACS 4.1(4) Build 13 Patch 1and a weird thing is happening:I need to make a user an admin on a nexus switch, so I'd like to add the Tacacs+ custom attribute cisco-av-pair*shell:roles=ânetwork-adminâ to the user.I can do that all ri...
I have created a loopback# interface which I would like to be used as the router source interface for the NTP client and/or built-in DNS server so everything originating whithin the router has only one and unique IP address (such as: logging source-i...
Hello, I'm Guilliano and have problems with the operation of syslogcollector and sysloganalysis. The current situation is: * Unsubscribe the host that was active and I can not subscribe to another host because I get the error: SLCA0152 and SLCA0126. ...
We were trying to use EEM 2.2 to monitor 4 BGP neighbors and if they all went down to remove eigrp from the configuration. Apparently this type of monitor is not available using EEM so it was suggested that TCL would be able to do this. Currently thi...
Dear Concern,I have installed LMS on Windows 2003 server. And everything was going smoothly.Recently I have found a problem like that, when I add a device, it shows in the DCR,But when I try to add this device to a group for topology view it does not...
Hi,I am trying to sync archive for the devices that have never had their config's collected. When I try to do this I get the below error.DCMA0055: URN_NOT_FOUND : urn "JRM" : Not found !! DCMA0077: Could not create job. Check dcmaclient.log for more...
I'm having a problem adding WISM modules to CiscoWorks. Here is the output from the failed archive management job:*** Device Details for durhq1-cra-wr01 *** Protocol ==> Unknown / Not Applicable Selected Protocols with order ==> SSH,Telnet,TFTP E...
Hi,RME 4.1.1The software distribution job is always failing for this cisco 3750 switch.I tried to fetch a small text file on the switch from cw server to verify UDP-69 connectivity. TFTP worked fine for the test file.C:\PROGRA~1\CSCOpx\files\rme\jobs...
Hi All, I dont understand why UT is not discovering cameras connected to my access switches. There are aroung 300 cameras in the building but LMS not even finding one and also it discovered 20 hosts out of 250 end hosts. but IP phone it is finding co...
NEED HELP! :-)I made a baseline template that basicaly says: If you encounter an interface with a vlan24, apply a port-security mac-address sticky command. TEMPLATE FOLLOWS: In Conditional Block's SUBMODE:interface [#.*Ethernet.*#] CLI Command (of co...
We have a network of about 750 Devices. We have implemented LMS 3.1 as a primary NMS in our NW. Now we want to measure total downtime in a month through CW LMS. How to do that ?
I have a user with 4 sessions showing in the user login information. The user has logged out of CW. How can I clear these sessions?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
06-21-2024 11:13 AM | ||
06-17-2024 01:50 AM | ||
06-09-2024 01:27 PM | ||
05-16-2024 02:39 PM | ||
04-23-2024 05:52 PM |
User | Count |
---|---|
2 | |
1 | |
1 | |
1 | |
1 |