Network Security

Hello all, I have set up an asa Cluster with 2 ASA 5585-X with FirePower HW modules, The cluster mode is Individual interfaces and I set 2 routes per zone to distribute trafic with equal cost. I set an interface 10 GE as the CCL interface expecteing ...

hi everyone, i need to create ACL to allow domain to enter our network , and they don't have a public IP , instead they are using Dynamicdns. So i need to add them to our white list by using Domain name. the problem here , i have followed all steps h...

Hi All, I have a requirement to integrate CISCO ASA VPN 9.3 with one of COTS Product. The requirement is to terminate/logoff end-user VPN session as soon as end-user is terminated in this COTS Product. I am aware of REST API that are available for t...

Hi Guys, Good day! We have this problem with the FMC dashboard. It stopped showing data. One of our network tech restarted the SFR module while the FMC is still live. This was for troubleshooting purposes why he restarted the SFR because there wa...

Hi, I have a ASA 5506-X. I have Cisco VPN Client version 5.0.07.0290 running on my Windows 7 Computer. I  would like to be able to connect to my 5506-X using the Cisco VPN Client Software with a designated .pcf file that contains the IP address of th...

Hi All We are using ASA Version 9.4(3) and having an Outbound SMTP problem with our mailserver.When we send mails the firewall IP is used as sender, not the mailserver IP, and that bounce mails to other mailservers.What we want is the mailserver IP t...

Hi, I wonder what would be the more elegant design/solution for one scenario where we have asa 9.1 with multiple sub-interfaces, one for each tenant, and internet on OUTSIDE that must be used for all tenants and with one DMZ interface that has shared...

Hi, I am just looking for an explanation to this error message. I have a HA pair of 5525's that went nuts yesterday and this error showed up over a million times in about 20 minutes.  It then started working again with no intervention from me, and I ...

Is there support for WCCP?

Dear All I have configured two static NAT rules on ASA which is running 9.1 OS version. `configuration is like  Ist Nat rule Real  IP 10.50.1.16 Mapped IP 192.168.200.1 with source port 80 and destination port 80 Second Nat Rule  Real  IP 10.50.1.16 ...

When Sourcefire sees a URL in an email, does it follow the URL as part of the IPS function (i.e. for reputational assesment). If so, can this be disabled in any way other than disabling the URL filtering as a whole ? Regards Darren