Network Security

Engage with peers and experts on network security topics such as Secure Firewall Threat Defense, Adaptive Security Appliance, Secure Firewall Management Center, and Security Cloud Control.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

“Join

 
Labels

Forum Posts

Have 3 Sensors 2 x in one country (protection and control license)  and 1 ( Protection, control and URL Filtering) in another country (*) I have created a separate IPS and Access Control Policy for the 2 first sensors and then another IPS and Access ...

hekstee01 by Level 1
  • 642 Views
  • 1 replies
  • 0 Helpful votes

Hello, I would like to configure Port forwarding on ASA 5512 v9.2, but no chance to get it up and running. My topology is the following PC(Running License Server in port 27000 IP. 192.168.X.X) -- SW (192.168.X.X) -- Inside--FW5512 --Outside -- Inte...

Hello, I am running ASA 8.4 and will be grateful is someone can resolve my concern. I performed below steps 1.Manual NAT nat (inside,outside) source dynamic local global object network local subnet 8.8.8.0 255.255.255.0object network global range 1...

I have a Cisco 5505 8.4(1) version (50 users) so configured:  dual static routes to two different ISP routers (192.168.30.1 and 192.168.30.2) route outside 0.0.0.0 0.0.0.0 192.168.30.1 128 track 10route outside 0.0.0.0 0.0.0.0 192.168.30.2 128 track ...

Resolved! ASA with Firepower

I am looking into buying ASA with Firepower which can be managed by FireSight. Which is my best option between ASA 5506-x, 5508-x, 5512-x, 5515-x and 5516-x. Ability to manage the Firepower with Firesight is key.

Hi Guys I have  the Cisco FireSIGHT System 5.4 Proof of Value v1.1 running. Usually i dont have licensing issues as everything just works, but for this particular session, when working under "Policies" "Network Discovery" it says Firesight License ...

LSA4 by Level 1
  • 563 Views
  • 2 replies
  • 0 Helpful votes

Hello,I need to configure the ASA to log messages to syslog server when 20% packet loss occurs on the outside interface.I think this is possible using IP SLA and EEM with the "event message ID" command.Any ideas of how to implement and configure this...

Hi, I am trying to define Policy Based Routing to allow 2 outside interface. I have created the route-map but could not assign it to the interface. I could not fine command policy-route. I need to define the following command "policy-route route-ma...

manemaren by Level 1
  • 1476 Views
  • 5 replies
  • 0 Helpful votes

How can I find the historical maximum connections per second for a particular ASA?ASA1# show resource usage detail ...Conns                 1712         59202       280000       0         System...Conns [rate]        20             2878         N/A  ...

Adam H by Level 1
  • 3223 Views
  • 2 replies
  • 0 Helpful votes
Review Cisco Networking for a $25 gift card