Hello guys, Hope you are doing well! I am about to buy an ASA-x with firepower services and I need your help:1) Does the ASA-x Bundle include all the Firepower licenses (IPS+URL+AMP)? if so, are these permanent licenses?2) If I purchase the Bundle, d...
Hi Team,I have 3 interfaces on ASA, guest, outside and DMZ.The guest is trying to browse to xyz.com, which resolves to a proxy arp address on the outside interface. There is a static NAT for this address to a host in the DMZ.I want to translate the d...
Does anyone know how to change the gw on the sourcefire module on a cisco asa 5515-x? I set up the IP on the module and it works fine, but the gw has since changed and I cannot seem to change it. I have tried changing in the asdm in the startup wizar...
Hi,I dont know if this is a bug in different versions of ASDM or something that i'm doing wrong but it could be solved changing something. I've tested this with different versions of ASDM, from 7.2.2 to 7.4.1, and different versions of ASA, asa923-4-...
Hi, The back of the ASA 5516-X unit says a different serial number compared to the show version from the unit. Is that a problem, Which SN to link the license to? I received a 5516 control license in the box. ThanksLovleen
Having just upgraded to 5.3.1.4 (19) i'm trying to apply Access Control Policy, nothing fancy just a new un-configured policy. When I click apply to device after about a minute I get an error as follows:Access Control Policy Apply ErrorThe access co...
Hello,I am replacing existing ASA 5520 8.4 firewall with ASA 5545X 9.5, I am migrating the configuration from the existing firewall to the new one. What I have done so far, I have extracted the 8.4 configuration and applied it on the 9.5 section by s...
Hi I've just started a new role and after looking at the ASA 5550 config I have an issue. The inside interface has security level 0 and outside security level 100!It's been like this for years!So there're lots of inbound rules , some NAT entries and...
anybody knows an ASA Firepower can block/permit "naver line" Application.
HI There, We are setting up a DMZ for our VPS Virtual Machines. We have our esxi host behind the firewall on 192.168.1.101Our VMs internally are all working fine. Our issue is we want to create VPS VMs with a static public IP address on the DMZ. We h...
Hi ,When you ping from asa packet tracer it does say the connection fails but it doesn't if you do it actually , why ? for isntance I can ping 8.8.8.8 from outside interface ip but when i do the packet tracer command it says it will fail. does the ...
I got some issues with NAT configuration. I have a host server with 2 service: WWW and DNS. I want to access Server via IP address and domain from outside. How to configuration ASA and router??? Thank's!!!P/s: my english is not good !!!
I just reboot my both firewalls connected as active/failover mode, some of the devices were not establishing the connection. when I checked the fire wall I notice these connection using same source and destination interface OUTSIDE.UDP OUTSIDE 10.2....
So here is my connection "map" ISP Modem ----> PIX 515e -----> LAN ISP Modem ip XXX.XXX.X.XPIX 515e Outside ip XXX.XXX.X.XPIX 515e Inside ip XX.X.X.XPIX is set do dmz on the ISP modem, i cant put the modem in bridge mode because i dont know th ppp pa...
hello, I want to ask a question. how can i assign secondary IP Address in firewall ASA 5515X just like in routerand if it can't is there a way to add secondary ip address in firewall ? please help Thank you,Fachroky
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 05-05-2026 09:59 AM | ||
| 05-02-2026 06:09 AM | ||
| 04-30-2026 12:46 AM | ||
| 04-24-2026 07:04 AM | ||
| 04-22-2026 11:56 AM |
| User | Count |
|---|---|
| 9 | |
| 2 | |
| 2 | |
| 1 | |
| 1 |
