Network Security

Engage with peers and experts on network security topics such as Secure Firewall Threat Defense, Adaptive Security Appliance, Secure Firewall Management Center, and Security Cloud Control.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

“Join

 
Labels

Forum Posts

I see the following example at http://www.cisco.com/c/en/us/td/docs/security/asa/asa94/configuration/firewall/asa-firewall-cli/access-acls.htmlhostname(config)# access-list demoacl extended permit ip 2001:DB8:1::/64 10.2.2.0 255.255.255.0How does thi...

paul8young by Community Member
  • 5815 Views
  • 2 replies
  • 0 Helpful votes

I have a problem with a site behind an ASA. It is an intermittent fault. I have Wyse terminals which provide a virtual desktop. The problem I see is the desktop sometimes connects and other times it doesnt.A capture of the traffic between a terminal ...

mickyq by Level 4
  • 670 Views
  • 2 replies
  • 0 Helpful votes

I have three security context. Admin, Internet and Internal. Requirement is to enable two OSPF process per security context. I have checked in the documentation that ASA support two OSPF process simultaneously per ASA and OSPFv2 is supported in multi...

I was trying to update my ASA 5525-X to version 9.3.X both the ASA and the CX module (the two have version 9.1.1).The problem is that you upgrade your ASA to IOS 9.3.3 but can not update the CX module. I want to know if there is some kind of order in...

lmontalvanr by Community Member
  • 694 Views
  • 1 replies
  • 0 Helpful votes

Resolved! STATIC NAT

Hi eveyone,The discussion is about Static NAT. I have a scenario please clear me about the point of view.  Suppose i have taken a ISP connection for a site and hosting a web server inside the site. ISP has given one IP address that /30. we have reque...

I was trying to update my ASA 5525-X to version 9.3.X both the ASA and the CX module (the two have version 9.1.1).The problem is that you upgrade your ASA to IOS 9.3.3 but can not update the CX module. I want to know if there is some kind of order in...

lmontalvanr by Community Member
  • 1186 Views
  • 2 replies
  • 0 Helpful votes

Hi, I am running ISE 1.2 and I received the above error message in main management appliance.If I am looking at active directory under "External Identity sources" I can see that one of my ISE servers (management unit) is jointed to the domain but dis...

Review Cisco Networking for a $25 gift card