Buy or Renew
Buy or Renew

Network Security

Engage with peers and experts on network security topics such as FTD, FMC, FDM, CDO and ASA.
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation

“Join

 
Labels

Forum Posts

Start a conversation

Resolved! vulnerabilities associated with ASA 5520

 Hi everyone, Scan results shows that ASA 5520 config for ipsec and anyconnect ikev2 has following vulnerabilityMedium strength ciphers supported-----The remote host supports the use of SSL ciphers that offer medium strength encryption, which we curr...

mahesh18 by • Level 6
  • 3564 Views
  • 7 replies
  • 0 Helpful votes

AT&T U-Verse and VPN

So AT&T has forced me to switch from their standard DSL to the new U-Verse.......  So far things have been less than fun. My set up was this.5505 set up to establich PPOE connection.  This 5505 then created a VPN to different office.  Staff could sur...

cisco ASA NAT Design question

Dear All,I have a Nat design question. I would like enhance the communicaton that i have with a partner company.The issue is that we use common ip addressing for several networks.You can see in the attached diagram . I have currently an ASA 8.2.5 whi...

Resolved! ASA firewalling VLANS on a switch

I have a slightly odd request due to audits. I am being asked to put an ASA firewall between 2 VLANs and the other VLANs on my 4510R+E. I thought I could just disable routing on the 2 VLANs on the switch and forward the traffic to the ASA allowing it...

Server setup in DMZ Environment

Hi, Iam setting up a DMZ environment to have External customers access my Servers sitting in the DMZ. I have attached the diagram for reference.Proposed Setup1) 2x ISP links (redundant) - IPSEC connections from customer terminating on our Internet Fa...

Internet stops working randomly

Hi,We are using a ASA 5512.Inside there are not more than 20 odd hosts. This is lying at remote office and is managed remotely via ssh if required.We are using 9.1(3) firmware. Around 4 months backthere was one incedent  internet stopped working afte...

sushil by • Level 1
  • 470 Views
  • 1 replies
  • 0 Helpful votes

Resolved! Help setting up static NAT with multiple external IPs using 9.0.3?

Sorry for the trivial question, but I can't seem to figure out setting up NAT with multiple external IPs (e.g. 1.1.1.3 - 1.1.1.7). I have my outside inteface set to 1.1.1.7, however how do I allow say RDP (tcp 3389) being sent to 1.1.1.3 to be forwar...

Resolved! self-signed cert

I have a customer that is using an ASA 5515 and they are requesting the certificate for the webVPN to be changed to use 2048 bits for the Public Key. They didn't purchase or install a cert on this firewall so it is just using the default cert that wa...

DNS Rewrite / Redirect

Hi There.I want to achieve DNS rewrite for my users at the inside interface (192.168.0.1/24). So when they to reach www.myactivedirectory.com 7.7.7.7 (on the mypages interface) the ASA should translate/rewrite 7.7.7.7 (orginal request) into 8.8.8.8 (...

No Natting

i don't want translate inside network segment (172.31.20.0/24). I want it to be able to communicate with outside segment(172.16.54.0/24). How should i configure?      (172.16.54.0/24) outside<<<<firewall>>>>inside (172.31.20.0/24)                    ...

Load more
Review Cisco Networking for a $25 gift card