Network Security

Hello, i try to find an old Version of the ASDM launcher to get on my asa. Since last month i got a failure.Could anyone send me a link to the old version or can send me this via email.Thanks a lot. Karl                  

I have an HA pair of 5510's that are way behind on updates.  They currently only have 256 MB of memory, so I am considering the upgrade path below.  Does anyone see any issues with this?  is there anything with my current config that may not work cor...

I have a Cisco ASA that allow me to access the ASDM/ HTTP page once. If I close out of the ASDM I can't get back in until I reboot the ASA. I always have access with Putty, that is how I reboot it. I have tried no http server enable and then http ser...

Hi all,if i have a static NAT setup for a subnet... for instance "static (inside,outside) 10.224.100.0 10.224.100.0 netmask 255.255.255.0" so that these clients NAT to themselves and are accessible from the outside, how can I add a policy dynamic NAT...

hi,i am running version 6.2 on ips 4240. could please someone let me have the procedure to upgrade the OS to 7.1.8 please? is this upgrade same as cisco IOS using tftp ? what is the procedure to upgrade ? is it first os and then sensor ? cold you ple...

                  Friends,I have my webserver set up in the DMZ on my ASA5505 but am facing a challenge with my users who i suspect are uploading malicious files through FTP. my webserver in running linux and cannot execute the same files, but when i...

I’m trying to set up an ASA as the main firewall for a charity organisation I volunteer for.I have been given a /29 address by the ISP and have obscured it just for security, in real life only the last octet is the same. X.x.x.40/29 with the router f...

Hello All,I would like to to ask some assistance. Acctually, I am not experience about site to site vpn, especially ASA.I had a problem about configuration, I  already try using manual guide from Cisco, Youtube, and many website. but won't establishe...

Ok I just purchased a 5505.  I am plugging the ASA directly into my DSL Modem. I have a static IP address 71.29.95.9 that the router is configured with. The DSL Modem connects through PPPOE connection. First question: Should I configure the Outside i...

We recently went from single ISP on our ASA to dual ISPs with failover using object tracking.  Dynamic NAT is working great with both ISP.  Using this:nat (inf_inside,inf_ISP1) after-auto source dynamic PAT_Networks interfacenat (inf_inside,inf_ISP2)...

I an very familiar with "end of sale" notices with ASA5500 firewalls bt my question is more on the ios side.Is there a way to find out what code revisions have been deferred or are not supported anymore?In other words lets say I have a ASA-5540 runni...