Network Security

I have a 6500 with an IDSM-2.  I'm getting request for email notification on certain signature hits and need to know if it's possible before spending a lot of time configuring.. Thanks in advance for any replies...Here's the scenairo:I currently have...

Before I get too much flack ... Ya I know 2621? But that is what I have to work with. I can bring up the far end which is a sonic wall fw. I am almost postive that it is a nat issue and the device does not know to push the interesting traffic through...

Hello,we have an application which creates 1400 query to db oracle in 18 seconds (I know it is a poorly written application) if application server and db oracle are on the same vlan. In my case there are two Cisco ASA 5550 in between, so latency incr...

Hi,I have a requirement to NAT an internal server to access specific public URL's on port 80 & 443 only.I was able to achieve this using IP (not URL) on the 8.2 - using extended access-list and dynamic interface NAT.To be more clear the requirement i...

Hello,I'm Christopher and i am configuring an ASA 5515 with subnets across of subinterfaces (vlans). everything works fine, but are not subnets, ie no traffic between them. I hit the config for you to see if something is missing. ASA Version 9.1(1) !...

Hi, i am using asa5510 and i want to configure QOS,in particular a limited Bandwith rate on a specific IP address.For example, I have a 4Mbits SDSL internet access and I want to dedicate to one IP a limited bandwith ( 2Mbits for example) on http prot...

i have a idsm-2 module and installed on a 6500 chassis but it's not work properlyhow i can fix this issueFJ

Hello allAm having a doubt here, so need your help.I want to configure an IPS in inline interface mode. What I have is internet rtr---->Switch----->outside intrface of ASAHere, I want to monitor/inspect the traffic coming from the internet.I am plann...

If I have an IPS image on ASA 5525-X with valid IPS license, how can I  prevent it from loading without removing the IPS image from the flash?I don't see any commands on ASA. Of course if I dont define service policy rules it will not inspect the tra...

Hi!Autoupdate feature is not working on ASA-SSM-20 module.We have configure:https://www.cisco.com//cgi-bin/front.x/ida/locator/locator.plAnd/Or:https://198.133.219.25//cgi-bin/front.x/ida/locator/locator.plAnd/Or:https://www.cisco.com/cgi-bin/front.x...

We have two 5525-x setup for active/passive failover.We would like to add IPS to the cluster.My vendor and I have contacted different person at Cisco and got different answers so I hope someone can add more information.The question is "how many licen...

Hi all.I allow a remote user access to our network based on his static ip which he is about to loose. We have configured a dyn dns address for his changing public IP that i would like to add to our cisco.Looking at ASDM how is it possible to allow a ...