Hi Please suggest what is the latest signature and version for IPS as i am preparing for my CCIE Security Lab from Networkers zone( http://networkerszone.com/) and need to get IPS upgraded
Dears,I would like to know if we have the smartnet of Cisco ASA with AIP-SSM module, Does cisco also includes IPS signature license along with the smartnet or is it seperately we have to buy?Thanks & Regards,Jvalin
Hi.I have a Cisco ASA 5510 (Security Plus) and have interfaces configured for external network (e0/0), DMZ (e0/1) and internal network (e0/2).We also have a management network that is separate from our internal network. This has a subnet of 192.168.1...
Hi.My customer have plan to install ISE with Trend Micro OfficeScan 10.5 as NAC solution.I confirmed below supported AV/AS Products list.Server side Trend Micro OfficeScan Corporate Edition 10.x is not included.But Client side Trend Micro OfficeScan ...
Hello, I Am Working With An ASA 5510, I Reset To Default And Then Upgraded The IOS From Asa708-K8.bin to Asa821-k8.bin Successfully (copy tftp disk0).My Concern Is When I Issue The Dir Command for disk0 i cant see the IOS file or any files for that m...
Dear Experts,We have two FWSM modules where mulitcontext is configured with two failover groups Group1 and Group 2 . Group 1 is activated on FWSM module 1 and Group 2 is activated on FWSM 2.The issue that i came accross is when i shared the managemen...
Hi Guys I want to access from VPN clinet machine to VPN clinet machine. Can you please advise me how do i achive this setup.i have Remote VPN configured in ASA firewall. From VPN client to Corportate works fine however not able to access to VPN cli...
Hi,I recently move into security devices using ASA for VPN & Firewall . Lots of choices book available from CiscoPress. Any suggestion either books or technical training?Thanks in advance. MA.
1. Cisco ACS /Solution Engine I think, the dedicated appliance, unknown version)2. Cisco Security Manager 3.1Are upgrades possible, or purchase of lastest version of the product is the only way out?What do we need for upgrading? Are there...
Hi:Does anyone know about a document in which is specified who may ACE rules are supported in an ASA5585-SSP-20?I need to compare this an other several specification versus a FWSM. I found the information for the module, but not for the ASA 5585-X..I...
Hi,I have a problem with an OOB deployment I am currently working on: when I move an authenticated OOB client from one switch to another, it remains stuck in the auth VLAN. It seems that NAC doesn't detect the new port correctly.This is what I did to...
Hello everybody,this is the configuration sample that Tunnelbroker gives to IOS router (not ASA )configure terminalinterface Tunnel0 description Hurricane Electric IPv6 Tunnel Broker no ip address ipv6 enable ipv6 address xx:xx:xx:xx:::2/64 tunnel so...
Have a client with an ASA 5510 running IOS 8.3.1. They have a block of 5 public IP addresses, which all currently have a static NAT assigned to them. They are looking at implementing a web interface for an application recently developed for their i...
I am fairly new to ASAs. I have a webserver in my DMZ that I need to allow access to wordpress.org. Could anyone please help me in the setup with this? Currently, my DMZ does not have internet access by design. Web Server IP (DMZ): 172.100.1.10 ...
Dear all,I'm newbie with the asa family. I have a cisco ASA 5540 and i cant make a simple PAT (many private IP to one public IP). Below you can find my conf. interface GigabitEthernet0/0.310 vlan 310 nameif dmz-vl310 security-level 50 ip address 192....
