Network Security

Engage with peers and experts on network security topics such as Secure Firewall Threat Defense, Adaptive Security Appliance, Secure Firewall Management Center, and Security Cloud Control.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

“Join

 
Labels

Forum Posts

Hi,i have difficulties to get PXE-Boot working in following scenario:Client is in Subnet 1 behind the FWSM (inside interface).Server is in Subnet 2 behind the FWSM (inside interface).Both, client and server have public IP-addresses, so no NAT is need...

One of my client has a 5540 security appliance where I have configured DMZ and other few things . Currently it has 4 workable interfaces excluding management interface . 3 of them are used for data connectivity because 1 port is for failover . Now wi...

Hi,we have cisco ASA 5510 with ios ver  8.0(4).we are getting following log. what is the root cause for this & what should we do to resolve.2011-12-10 00:00:42 Local4.Warning 172.26.4.203 %ASA-4-733100: [ Scanning] drop rate-1 exceeded. Current burst...

Resolved! Object-Group

Hello DearsI m grouping {object network} to one object group for the Dynamic PAT, But there is no option of dynamic after Nat (inside,outside) ciscoasa(config)# sh run object-groupobject-group network outside-interface network-object object obj-20.20...

I need to provide access to certain machine ips(source) to access other ips(destination) of different classess for the ports mentioned 22, 21, 80 , 3389, 3000, 443,8080, 8443 , 8000-65535 in my corporate firewall. Can you please give me the commands ...

Review Cisco Networking for a $25 gift card