Hi Experts,i need to buy a new ASA for my client. When i searched some things like BUN-K8, Bun-k9 noticed. What is really that? Do it affect the cost of the ASA. Our client need to create a VPN to one of its remote office. but need to permit only voi...
All,I could use a really good book/article/document (something) that explains how zone based firewalls work? I am familiar with the traditional ACL approach, but am very confused by the newer zone based firewall approach.Are there any recommendation...
All,Is there a good tool on Cisco.com that I can use to do an automated security review of my 881W config? I just made the jump from 12.4 to 15.1 and I think it would be prudent for me to have a review done of my config. Any thoughts would be great...
can we redirect HTTPS traffic to HTTP in ASA
Hi,I have Cisco ASA 5520 and want to use any syslog server for logging of URL traffic passing through ASA firewall surffing by coorporate end users. Could any one please share with me how to configure ASA for URL logging on syslog server. so that i c...
I currently terminate my L2L VPN sessions on the "OUTSIDE" interface via the actual IP address assigned to that interface.Can I assign the OUTSIDE interface a second address (VIP, Logical, Virtual etc.) and then terminate my L2L VPN sessions on that ...
i have an issue with ASA 5510.I connect to the device - https:/interfaceI see the options such as download launcher etc.But.. whenever I click on this I get stuckInternet Explorer gives "page not found"Or at the foot of the page it says "unable to do...
Ok, not sure if I should be posting this in the Routing section or Firewalls, but since it involves 2 firewalls I'm going to start here.Here's what I got. I have 1 network that I'm trying to make secure, and it needs to access 2 seperate networks. ...
Please guide with the commands - thanks
Now both ASAs have got 8.0(4) I want to upgrade only standby then move standby to active and testing.Do ASAs synchronize when first will have 8.0(4) and second ASA will have 8.2(5)??
Hi expert ,we are using ASA firewall.we have opened access for one link from our inside network on port 80 in our firewall ,that application is accessable on port 80, previously it was working. But right now it is not working. when I check on firewal...
Hi,I've uploaded the signature file to a router but when I do I get the following message: %IPS-3-INVALID_DIGITAL_SIGNATURE: Invalid Digital Signature found (signature verification failure). Any ideas what I'm doing wrong? Any help would be appreciat...
My search-fu has failed me and I'm hoping someone here can point me in the right direction:I'm having an issue with routing my traffic to a 3rd Vlan on my ASA5505. I have my internal VLAN as VLAN1, it is IP address range 10.10.16.xxxI need this netwo...
I have a L2L VPN between two ASA5510. The tunnel is up and passing traffic between 14 network pairs but two. I have checked that the interesting traffic is in the no nat ACL, in the crypto map ACL and in the interfaces permitted ACL in both sites. I...
HiI've an FWSM running A/A with a context in transparent mod. I've had reports of poor performance of traffic through this.From a show asp drop I see the "TCP Packet Buffer Full" is increasing, I know on the ASA you can increase the queue-limit using...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 11-13-2025 12:52 PM | ||
| 11-03-2025 09:48 AM | ||
| 10-30-2025 12:44 PM | ||
| 10-23-2025 07:14 AM | ||
| 10-20-2025 12:53 PM |
| User | Count |
|---|---|
| 3 | |
| 3 | |
| 3 | |
| 2 | |
| 2 |
