Dear Experts!!!!I configured ASA5510-CSC-10 firewall. I blocked all sites except some banking sites which under works HTTPS.But here the problem is my clent needs to type URL with HTTPS only. If he typed HTTP then the site is going to block.So i want...
Hello,Is there any checkbox on the FWSM web interface of the latest software code that provides the following option "allow traffic through firewall without NAT". So if I loads of static statements from one interfaces to another, does this checkbox d...
HelloInside Network - 192.168.100.0DMZ Network - 192.168.200.0static (inside,dmz) 192.168.100.1 access-list inside-dmz-static-nataccess-list inside_dmz_static_nat extended permit ip host 192.168.100.1 any This actually works. But my question is isn...
Hello all,I have one problem with PIX high CPU loading %85 (PIX Version is 8.0(3)). please see the below log:pixfirewall# show cpu CPU utilization for 5 seconds = 86%; 1 minute: 86%; 5 minutes: 86%pixfirewall# show processes PC SP STA...
Hello,I have a newish instance of 5520 running. I am seeing some odd logging issues in that the logs are significantly delayed showing up in the real time viewer. I'll try to connect, say on remote desktop, and will not see the traffic in the viewe...
Hello,We want to run ASA 8.4.x on an old ASA5540. We need to upgrade its memory to 2 Gb with the following memory upgrade: ASA5540-MEM-2GB=I suspect that we will completely remove the existing 1 Gb of memory and replace it with 2 Gb. If this is the c...
We recently upgraded our ASA to 8.3, most everything went ok, but I am having problems with outgoing nat. It seems that when one our systems that needs to be natted to an outside IP address when connecting out is not doing it. When that system goes o...
There is a PIX firewall and it has this configured on it.static (inside,outside) tcp interface 3389 192.168.1.250 3389 netmask 255.255.255.255 0 0 This line of code works ok for port 3389 but I want all tcp ports to be translated. Not just 3389. Ho...
Some emails sent to me are disapering and i cant see the problem i have attached my configuration
Hi,I have two ASA in my office. One is new 5505 and other is ASA5510(old). Both are connected to ISP router in our side. ASA5505 is used only for a VPN connection with our client. But the internet getting disconnected in this ASA. But there was no pr...
Hi Netpro team,can anyone please help me in identifying the crash file from cisco asa firewall. problem was that this firewall rebooted automatically on 12th-ABC-2011. I have edited the device details of the crash file, in order to bring the confiden...
HELP Please help me. i have attached the diagram herewith. 1.i want to communicate HQ PC to SERVER in range of 10.34.249.0 2. Server IP 10.34.249.0 should communicate with 172.16.105.0. 3. Server Should able to acces Internet using BSNL modem Please...
Hi,I have an ASA 5510 and I can not configure fine.My problem is that I have 10 public address connected to ASA and each public address is redirectioned to an internal IP address.An of these public address is the ip address of mi ASA.I need help for ...
Hi all,I am running 2 IPS's, I updated them with a signature.The one loaded fine, the other... Well in short gave me the followingICCIPS login: <removed>Password:Last login: Mon Jul 11 11:38:25 on ttyS0***NOTICE***This product contains cryptographic ...
I've been researching this and unable to find documented info. I've been monitoring some ACLs for a client to see what is/not needed by watching ACL hitcounts. I do have a Primary/Back-up cluster enviorment. What I've found is for example my Prima...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 05-05-2026 09:59 AM | ||
| 05-02-2026 06:09 AM | ||
| 04-30-2026 12:46 AM | ||
| 04-24-2026 07:04 AM | ||
| 04-22-2026 11:56 AM |
| User | Count |
|---|---|
| 9 | |
| 2 | |
| 2 | |
| 1 | |
| 1 |
