In the past few weeks I've had an issue in ACS 3.3 when adding a new device. When verifying that I can log into the device using TACACS, I get a key mis-match error in ACS's failed logs. When I look at the device the key is missing. I re-add the k...
The question comes up every now and again - when do we (IPS signature team) disable or retire signatures.Remember that there is a difference between disabled and retired. Essentially:Disabled/enabled - turns the written alert off/on.Retired/active - ...
Hi all,I am having issue while sending mails( with attachments only) to yahoo.com through Domino smtp server and i am getting below error messagesConnection broken after an error sending DATA commandAttempting to Disconnect:Connection already disconn...
Dear Support-Team,Below I attached My Scenario what i want to implement.Totally I had 3 branches Branch-A,Branch-B and Branch-C.Site to Site VPN has been established successfully between Branch-A to Branch-B and Branch-A to Branch-C.IP addressing Sch...
Hi Guys,How can I check the total number of connection statistics in ASA for a specified number of days ? I beleive show conn shows count only for active number of connections. My requirement is to find number of connections occured through asa from ...
Hi,We are using cisco asa-module for IPS and IME as Management Software.How to release a IP blocked in IPS immediately in IME.Rgds,Gijoe
I am setting up a pair of 5520 in A/S mode but the traffice from inside to outside seems blocked somehow. asa01# sh run : Saved:ASA Version 8.3(1) !hostname asa01enable password LFJ8dTG1HExu/pWQ encryptedpasswd 2KFQnbNIdI.2KYOU encryptednames!interfa...
I am having two issues:1. my email going out is working along with internal, but inbound email is not working. My barracuda email filter is 192.168.1.107 and my exchange 2007 is 192.168.1.222 along with this OWA does not work.2. Terminal Services doe...
Hi Guys,What does the following statement means on the pix firewall ? For exampleglobal (outside) 2 67.75.236.193-67.75.236.194 netmask 255.255.255.240Does the above mean that we have got two address 67.75.236.193 and 67.75.236.194 for the firewall t...
Hello,Here are the configs for failover:PRIMARYfailover lan unit primaryfailover lan interface failover GigabitEthernet0/3failover interface ip failover 192.168.3.1 255.255.255.0 standby 192.168.3.2failover link failover GigabitEthernet0/3failoverSEC...
Hi allI am trying to add a username to the local database for remote VPN connection but always i get this error when I addEncrypted password is of incorrect lengthUsername addition failed.Can you help me to solve this problem?ThanksMukundh
Hi,I could not find any information about traffic which is over declared IPS appliance performance (throughput) limit.Those packets will be droped or will pass through without inspection?Thanks in advance!Radim
I have an ASA5510 which was running version 8.31. SSH was working fine on version 8.31 but since i upgraded it to version 8.41 the SSH stopped working. I would appreciate if someone can help me?Thanks,Lake
I have one ASA 5520 up and runnign, with complete configuration (ssl customization, DAP, CSD...) with bunch of files on flash drive, etc. I am using software 8.3Now I received one 5520 that I want to use failover, it is with 8.3, I will make sure tha...
alright folks, i'm new with the asa's...i'm familiar with the FWSM's on 6500's and pix...I'm running Version 8.3(2) and i wanted to setup nat-control and use of identify nats for advertising inside subnets to my outside networks.the old command was s...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 07-22-2025 09:48 AM | ||
| 07-16-2025 04:21 AM | ||
| 07-06-2025 01:40 PM | ||
| 07-04-2025 01:59 AM | ||
| 06-19-2025 07:32 AM |
| User | Count |
|---|---|
| 10 | |
| 5 | |
| 5 | |
| 3 | |
| 1 |
