Hello. I have a cisco 1841 router and i am trying to make it work as a zone based firewall with anyconnect ssl vpn connections. I have created 4 zones (Inside, Outside, DMZ and VPN) and i managed to have the router working with internet traffic and v...
first question - do the 2 asa's failover control interface have to be directly connected to each other using a crossover cable? or can they logically connected through our layer 2 switching infrastructure? what about through a metro-e LAN?2nd questio...
I have just purchased 2 x 3650 cisco switches which will sit alongside the 2 x ASA 5510's i have installed.Ok issue is i only have a single inbound internet connection and as I am implementing VLAN's on the switches have created one for the external...
I'm having no buffer and overuns errorsin 2 giga interfaces568612690628 packets input, 356568347548892 bytes, 104287727 no buffer Received 1032492130 broadcasts, 0 runts, 0 giants 0 input errors, 0 CRC, 0 frame, 33255019 overrun, 0 ignored, 0 a...
Hi,I have come across strange issue with ASA failover. The ASA software version does not matter whether 7.2x or 8.x. The issue is that if there is an ASA failover pair at one site having a tunnel to a remote site (ASA or cisco router) sometimes the...
We have some ASA 5510. Because of the update to version 8.2 we upgraded our memory from 256 MB (original) to 512 with the memory upgrade kit from Cisco. Now the new version 8.3 requires again a memory upgrade of 1 GB.So the question is, what is the m...
Hi,we are in process of upgrading our ASAs to 8.3; multi-context mode is used and wondering is there any gotchas when upgrading multi-context mode to IOS ver 8.3?I know there are some changes how nat and ACL are configured in ver 8.3 but could not fi...
can some experts help me in getting away with my confusion on below diagram. Internet ISP-1 -- ASA -- router -- ASA -- PIX(DMZ) ----ISP-2there is a need to get one of the dmz web servers (currently reachable/used via ISP-2) to be used via ISP-1 only...
Dear Experts,I have ASA5520, Configured Subinterface on inside for different VLANS with same security level. But i'm not able to communicate with same security level subinterface with VLAN1. I can communicate between other subinterfaces (with same se...
Hi people,I have the follow scenario, in my network i have a PIX, and the 2 VPN configured, and all works fine, no errors. But 2 weeks ago, we changed the PIX to Asa 5505, with same configs, and the one of the VPN is generating intermittence, lose p...
We host software for a customer and they just installed a managed mpls router. Management wanted a way to protect there servers in our datacenter so we put the asa inbeween there mpls router and there vlan in our datacenter. One of the requirements w...
We have multiple VPN tunnels to multiple ASAs. However, one we have OSPF running over the IPSec tunnel to the host ASA, and this remote site is the only ASA we're having problems pinging to or from the internal interface from across the tunnel. The h...
can you please help me figure out why I cannot telne,ssh or asm into an ASA 5505 using its private ip address? I do have a succesful remote access VPN.I can asdm in to asa from home using its public interface. also my local pc has the same private i...
I am at a loss, I am trying to install the VPN client on a 2003 Enterprise x64 server and when I try any of the following installation clients I receive a 1721 error.Here is the list I went throughvpnclient-win-is-4.8.02.0010-k9vpnclient-win-msi-4.8....
I have an ASA 5520 at a remote location. It was set up and configured by a contractor. Up until a few days ago it was working fine. The AnyConnect quit working. I thought I would just reload the .svc file Then I couldn't use ASDM, so I went to th...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 08-26-2025 09:16 AM | ||
| 07-16-2025 04:21 AM | ||
| 07-06-2025 01:40 PM | ||
| 07-04-2025 01:59 AM | ||
| 06-19-2025 07:32 AM |
| User | Count |
|---|---|
| 8 | |
| 8 | |
| 7 | |
| 1 | |
| 1 |
