Network Security

Engage with peers and experts on network security topics such as Secure Firewall Threat Defense, Adaptive Security Appliance, Secure Firewall Management Center, and Security Cloud Control.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

“Join

 
Labels

Forum Posts

Hi There,Can you please help, I have servers sitting on the internal LAN inside 1( 192.168.76.0 /24 ) I would like all the hosts on this network to browse the internet by using the external address of the firewall (outside), I need to do a NAT to hid...

r.arzouni by Community Member
  • 2213 Views
  • 8 replies
  • 0 Helpful votes

Hi,My NMS is reporting that the below interface is Up/Down.  I cannot find any reference to this interface in the CLI.  It is not the mgmt or other gig interfaces.  Does anyone have any idea what this hidden interface is?  Appreciate any feed back.Di...

Hi everyone,My partner is looking for the Smartnet for his PIX525, but PIX525 is eol the replacement is ASA5520-BUN-K9 and ASA5520-k8.Questions:1.     Can the smartnet for ASA above work with His PIX525? Y or N2.     If Yes, which Smartnet should I g...

rahman001 by Level 5
  • 2163 Views
  • 12 replies
  • 0 Helpful votes

Hi,I have the following scennario:VLAN 1, 5, 10 etc. ---- Core 6500 MSFC ---- Vlan 2 ---- FWSM --- VLAN 4Everything goes well except when i try to ping from vlan 4 to vlan 1 and vice-versa. All the connectivity between vlan 4 and all the internal vla...

I'm back again with another question.  The diagram below is the layout I'm working with.  The ASA and Bordermanger are running side by side for now until I can phase everything over to the ASA, so it makes everything a little complicated right now.  ...

mhobart2 by Community Member
  • 3138 Views
  • 9 replies
  • 0 Helpful votes

Dear All,I am having Cisco ASA 5510 @ my office. i am usually remain out of office. so when problem occour its not possible for me to remote login in firewall using software like "PUTTY".is this possible to configure telnet access to firewall from ou...

vinayak by Level 4
  • 10192 Views
  • 9 replies
  • 0 Helpful votes

  Dear All,Currently in my office i am having Cisco ASA 5510. I done port forwarding on ASA & using my public IP for accessing my Citrix Application from anywhere on internet.Now i am having another Web Based application which i want to access as sam...

vinayak by Level 4
  • 2163 Views
  • 11 replies
  • 0 Helpful votes

Hi,i have upgraded my pix with version 8.x and it is working , but when i try to download the old version it is giving error.kindly suggest.Directory of flash:/4      -rw-  1732        01:05:21 Jul 30 2006  downgrade.cfg7      -rw-  5103672     01:06...

rafat0426 by Level 1
  • 645 Views
  • 1 replies
  • 0 Helpful votes

I need to NAT the DMZ vlan to a non interface IP for internet access.I was thinking of doing a static commandstatic (DMZ,outside) 192.168.1.1 1.2.3.4 255.255.255.255or if I need to do a global nat?global (DMZ) 2 <external IP>nat (DMZ) 0 access-list N...

jeffreymertz by Community Member
  • 1147 Views
  • 3 replies
  • 0 Helpful votes

It seems weird to me that when you type "wr" at an ASA prompt it does a write memory.  Shouldn't it come back and tell you it's an ambiguous command?

jaysoo by Level 3
  • 49164 Views
  • 6 replies
  • 0 Helpful votes

I currently deny inbound port 25/SMTP for sources from APNIC, RIPE, AfriNIC & LACNIC; and permit ARIN source IPs on 25/smtp. This works really well and has reduced +99% of UCE/SPAM.Not that I don't appreciate the sincere offers, but I don't currently...

Review Cisco Networking for a $25 gift card