I have an ASA5505 with the base license. It is connected to a Cisco 1760 router with multple internal networks.I have setup RIP between the ASA and the 1760, the ASA is properly feeding a default route to the 1760.The ASA5505 has an internal IP of 1...
Can CSA produce and inventory of applications installed on a protected host??
First, a brief summary of how we got to where we are. Our current internet connection comes in via a 10Mb ethernet handoff. This circuit is terminated on our Cisco 5520 ASA (outside int). When we got this circuit the IP block assigned was just a 2 ...
I've got Vista 64bit SP2 and Windows7 users complaining after they install the client, use it for a while, shut their machines down for the day, the next time they boot their machine up, the AnyConnect client is no longer installed.The users are NOT ...
Hi all,I have a FWSM running ver. 4.0(3) with ASMD 6.1. I'm trying to capture traffic on devices for troubling shooting. I'v tried the Real-Time Log Viewer and put the name of the device in the filter section. That doesn't work well. Log viewer would...
Is there something you have to do in the setup of an ASA5510 to be able to use the USB port?
I am reaching out to you all in the hopes that one of you might be able to assist me with the configuration of a PIX 515 firewall. Basically, I am trying to configure a PIX 515 for use with my Cox Business Internet service. They have assigned me a si...
Hi,I'm having trouble with ZFW and url filtering. If I set it up according to documentation it blocks every website, however if I remove the urlfilter from the policy, everything works.Any ideas?Here is my config:parameter-map type urlfilter websense...
Hi, I have a 2 Mb link and wish dedicate 800 Kb for specific host. The another host in network can use only 1.2 Mb.Look the configuration that I did:access-list acl_qos extended permit ip host 172.16.1.10 any access-list acl_qos_default extended per...
Hi all,I am trying to isolate an issue with one of our web servers. I have a ASA 5510 behind which I have a Windows 2008R2 IIS8 server.The problem is that even though the site works, everytime I go to the page it seems to stall. Only when I refresh...
Hello folks -I would like to monitor all outbound SMTP traffic from my ASA 5510. Currently, there are no access lists applied to the inside interface for outbound traffic. Everything from inside to outside is allowed.What would be the best way for me...
I went to a customer has ASA 5510 Version 8.0(4) but i couldn't access ASDM.here is the configurationany one can helpthank you
Is there a way to do NAT to for 3-4 different public address if the source is from a certain source address range. For example, our district haveelementary, middle, high school, and adminstration users, is there a way to NAT address from each of the ...
Hi All,I have two ASAs 5510 working fine in Failover. One is Active and the other Standby. If I force a failover with the command ''no failover active'' for example, then the secondary ASA takes over statefully. It works great. The only problem that ...
ASDM 6.2(1) launched by Cisco Security Manager 3.3(1) against ASA 5520 running 8.0(5). I can run the wizard and everything looks normal but the capture statements are not applied to the ASA. We recently upgraded from ASDM 6.1(3), Cisco Security Man...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 09-22-2026 04:13 PM | ||
| 08-25-2026 06:22 PM | ||
| 08-24-2026 12:26 AM | ||
| 08-20-2026 05:54 AM | ||
| 08-19-2026 07:59 AM |
| User | Count |
|---|---|
| 5 | |
| 1 | |
| 1 | |
| 1 | |
| 1 |
