Network Security

Engage with peers and experts on network security topics such as Secure Firewall Threat Defense, Adaptive Security Appliance, Secure Firewall Management Center, and Security Cloud Control.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

“Join

 
Labels

Forum Posts

Hi thereDoes the "HTTP redirect" feture on the ASA just redirect http to https for traffic connecting to an interface?Or does this feture redirect http to https for all http traffic that flows through the ASA?CheersTim

PIX-501PIX Firewall Version 6.3(4)PIX Device Manager Version (3.0(2)Here's what I want to accomplish...Internal network = 192.168.1.0Remote network = 12.34.56.0Need remote machine (12.34.56.78) to connect through PIX to local machine (192.168.1.1). R...

david by Community Member
  • 2517 Views
  • 8 replies
  • 0 Helpful votes

Have a beginner - intermediate level knowledge of VPN config on ASA and trying to clarify couple things...First, I've studied "Configuring IPSEC and ISAKMP" doc and compared to my actual ASA config (done by other CCNP). The doc makes no mention of tu...

I have a simple question but I am having a hard time getting an answer. WHen you do show access-list command on the ASA 5510 there is a hit count ....i know how to clear that but I want to knowis there a default timer that will clear the hit count ? ...

agrayson by Level 1
  • 2911 Views
  • 2 replies
  • 0 Helpful votes

We are running a ASA5520 and I have configured for a RRI on a L2L tunnel, but the tunnel is not connected and the route is still in the ASA routing table. Is this the way the RRI should be working? I am trying to use 2 ASA's on two different ISP'S to...

Hi Experts,If there are multiple sub interfaces and vlans are created with different security levelsWill the traffic flows from high security level interface to low security level interface?.What is the case if we have the acls in place?Thanks in adv...

kr_madan by Level 2
  • 2330 Views
  • 4 replies
  • 0 Helpful votes

Hi Guys,We are using IDSM-2 module in cisco 6509 chassis.I believe that only the default signatures were enabled on it at the time of implmentation.Now when I monitorit (I use cisco IDM as the GUI to access IDSM-2) like after 6 months I could find th...

antonyice1 by Community Member
  • 794 Views
  • 1 replies
  • 0 Helpful votes

I am trying to remove the access-list of the PIX , but is appearing that the access-list does not exist.Following in annex the access-list AGUA/B# show run access-listaccess-list intranetB_access_in extended deny ip host rgt-infor3.rgt.sabesp.com.br ...

HiI have a PIX 506E and have problems with frequent disconnections on LAN side.E1 interface is connected to the switch and a server and workstation are connected to the switch. After 10-15 minutes I am not able to browse the internet both from server...

Dear Cisco Support, I have one clarification to be made on product 877-k9 Router. Does it support Remote access VPN IPSEC server, If so how many client users can connect to router using IPSec Say 10,20.. and does it require any licensing for upgradin...

rohandast by Community Member
  • 746 Views
  • 2 replies
  • 0 Helpful votes
Review Cisco Networking for a $25 gift card