Hi,I'm just curious what happens to traffic when you have an IPS module in an ASA and it reaches the maximum throughput?Does it allow the traffic & only inspects what it can handle? Or does it "fail" and then either allows all the traffic or block ba...
I am not able to run ASDM V6.1.3 on a Vista PC. It works fine on a XP PC.Can anyone tell me what s/w version is required on ASA device as well as any requirement on Vista.Thanks for any feedback.Edmond
Hi,i have a question that it can be strange.in our network we have implemented idsm-2 module in our 6513 Switch in inline mode.without any discution about network design suppose that our network is going beyond IDSM-2 Throughput and then we want to u...
All,I'm converting from a Symantec Firewall (SF) to an ASA 5550. I've been looking through the ruleset on the SF, and I'm noticing that there are domain names listed as entities that reference another domain name. This means that a firewall rule woul...
Hi all,I have an 5540 ASAI would like to NAT the packtes this way:ORIGINAL PACKETsource: 192.168.0.10destination: 10.10.10.50TRANSLATED PACKETsource: 172.16.0.10destination: 20.20.20.50Is this possible?I always NAT the packet modifying only the sourc...
I have a new 5520 ASA that I am putting on to the network tonight. I set up the management port with the address of our management subnet and have it plugged into our core switch but for some reason I can't reach it via SSH, telnet or the ASDM. I hav...
All,Currently I have a Symantec Firewall (SF) and the Windows DNS server points to it as a forwarder. The SF has the root servers listed in it, and it does lookups for clients when the Windows box can't resolve. Does the ASA do anything like this?Tha...
I am trying to add Cisco 3560E PoE Switches with 12.2(46) IOS version to Cisco NAC APPliance Manager with version 4.5. But I was able to add the Cisco 3750E PoE Switches very easily.All the snmp configs have been verified.Provide some tips to add Cis...
I have looked through the NetPro forums for a couple of days now and have not found my answer.My question is, how do I setup an IOS based IPSec VPN tunnel using a 2811 with IOS os SP Services 12.4(13)?Let me know if you need any more information.Than...
Hi all,We moved our firewall recently from one subnet to another so I need to change the external IP for eth0 via the console. Can anyone either show me the commands or be kind enough to point to the documentation? Thanks a bunch.
How can I use TCPdump with the CAS? When specifying a physical interface while using TCPdump, it only picks up broadcast traffic. For example tcpdump -vv -nn -i eth1. Is there special options to look at all traffic through the CAS in my L3 deploym...
