Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm saying easy because you'll either know the answer or not. I have a line group configured with multiple extensions on a CM4.1 platform. In the absence of DND, IPMA or Extension mobility we wish to take one of these extensions out of the hunt tempo...
Hi,Authentication and Accounting both function correctly, however Authorization fails with a code 0x10 denial (backed up by ACS accounting). Upon sniffing and decrypting the Authorization packet the Nexus sends, it is clear that all usernames are bei...
Hi,I'm currently struggling to understand what certificate options are supported on the N1KV. I'm looking to use the switch in an environment where self-signed certificates are not acceptable, and therefore wish to enroll with an internal CA to furth...
Hi,As the title suggests really, I'm trying to find out what ports and/or protocols the redundancy services utilises when you have the active and standby VSMs on a network? On fixed configuration Nexus switches this is normally facilitated by EOBC, b...
Hi,I've just inherited a few IBM Bladecentre devices each populated with 4x 3110G switches operating in a stack.I've noticed an oddity that may or may not be an issue; basically within each stack, the master is shown as running teh CBS31X0-UNIVERSALK...
Thanks Rob. Any suggestions then on how to temporarily opt-out of the hunt in this scenario?If not then I've either got to configure extension mobility or try to get the IPMA function working but I'm not convinced that this will do the right job eith...
Thanks for the reply Michael. I have read the document you mention however it isn't particularly detailled in relation to the actual mechanisms that are used.You mention that AIPC is also used for VSM to VSM communications, could you point me to wher...
Thanks for the reply. That is what I suspected, so obviously the guy who installed these originally did a quick and dirty job.I'll do some testing later on and hopefully post a definitive answer.Many thanks.
