Network Security

Is there a command on the ASAs similar to the show ip accounting command found on IOS routers? Something showing source, destination, packets and bytes pertaining to those source/destination connections that accumulates?thank you, Bill

I created a LDAP server Group. When adding a server in the group, I have configured several different options and after I apply the options and test the connection I always get the same error "Authentication rejected: Memory Error". I do not know whe...

i created an alias for my dns server in our dmz and now we cant rdp or ping the server via its internal ip? im thinking the acl coming in from the outside to the dmz isnt allowing our access internaly. the dns server is still working normally.thanks ...

Hi,I am unable to add a 4200 series IPS sensor to the CSM database. It passes the connectivity test but at the end it says failed to add device and gives the following error "unable to get os version from device or configuration file".I have not had ...

Hello,I have a problem with VPN configuration of our PIX Firewall.We use this configuration:PIX 515E (3 interfaces) running the latest 8.0(3) firmware.We are using an L2TP IPSec VPN with certificates from our Microsoft CA and using the native Windows...

Hi,We have implemented NAC L3 OOB mode in our campus, we are facing issues with NAC now.Some of the ports in the switches are getting administratively shutdown by CAM automatically. Also in the CAM the following errors are found in the log files..Log...

HELLO,device=6500 with fwsmIVE INVOKE THE BELOW COMMAND, IT ACCEPTS IT BUT IF YOU SAY SHOW ROUTE, THE B ROUTE WILL NOT SHOW. BUt IF YOU SAY SH RUN, the command is THEREA. route inside 192.168.12.0 255.255.255.0 192.168.21.3B. route inside 192.168.12....

Hi, I've ASA 5510 & upgraded new IOS through ROMM after that it was showing below outputs. Why it is showing ""tftp://10.0.0.20/asa722-k8.bin" file instead of disk:0... Once I loaded new IOS I am not able give the ip address for the interface. There ...

I have a 2621xm, 2t1 wic, can i use this router and upgrade it with 2 vwic cards to to voip, bet the uk and us..thx

HI,I am installing PIX 515e through the PDM.Looks like I have entered all the required information correctly but still not able to access the internet.The router is working fine and I am able to access the internet if I connect my pc, with a range of...

Hi,I've been struggling with this for a while, and searched for an answer which has eluded me so far.I currently have a Pix 515E Version 6.3(5) setup to allow incoming requests on port 80 to be redirected to a server at port 8162 and incoming request...

Hi,We have some problems when using the rdp plugin of the asa software.Does anyone knows which java versions are supported in the new ASA version?Best regardsJorg