Network Security

i have a DMZ with a www server and a ftp server - i cant ping between the two. if i issue a ping i get one reply then 3 failures - if i wait about three minutes i can issue the ping again get one reply the the rest fail. i can ping the switch from th...

Hi, IPSec tunnel is running between 2 sites.Now we need to configure static NAT for 1 IP address comes under overlapping subnet.When we configure static nat then whole traffic is transfered to the static nat connection and my tunnel see not traffic....

Have a pix501 and it is setup w/ and isdn line. Now I will be changing the isp to road runner cable modem what things will i have to change in order for this to work?

if i am using basic licence, how can i upgrade to security plus?

Is there a way to have 2 seperate t-1's connect to an asa5520 for load sharing? These t-1's are on seperate physical routers and subnets.I have 1 t-1 hooked up and working and i would like to add another t-1. I do have a backup asa that is flashed bu...

Is there any issue regarding installation of a FWSM version 3.2 on a 6509 switch currently configured with a Sup720 version 12.2(18)SXD6 ?Cisco announces that support for FWSM 3.2 required a 12.2(18)SXF and higher...Thanks for your helpFrans

i have two 5540 between two different lans (primary and disaster)which i need to connect for syncronizing purpose.i use a point to point connection between the asa's.the asa has two interfaces configured at the moment, one is the primary (wan) and th...

Hi all,I have a big problema of dayly increasing memory usage on asa 5510 8.03.I turned off statistics and threat-management saving 50MB but the memory increases of about 10MB/day.Once already crashed.Please let me know if you can help me.Thanks

I have bsnl routerpix outside 192.168.1.101 255.255.255.0inside 192.168.10.1 255.255.255.0 lan network ip address range 192.168.10.101 - 192.168.10.250 pix configuration with command promptPix CONFIGURATION1) Enable2) Hostname3) Interface e0 auto I4)...

Does anyone know why our PIX 515 would lose some of its configuration lines over time even if it is never shut down?I have to keep re-entering some of the access list lines because they just seem to disappear

Hi AllAnyone know how I translate from port 1494 to Port 80 ?Cheers

I have an ASA5505 connected to one ISP router. The ISP has given me two different subnets instead of just one (nothing to do about it).Subnet 1: 87.54.x.x/29Subnet 2: 195.41.x.x/29I have some static NAT's on the 87.54.x.x addresses and that is workin...

I've tried Java v1.5,1.6 or the version posted on the Cisco Web Site but still no luck HTTPs into the box. When it launches, it displays erroryour current Java memory heap size is less than 256MB. You must increaste the java memory heap size before...

How do I open the appache port 8009 at the firewall.like wise fixup protocol ?? 8009port-object eq ??what will be the questionmark name.ThanksRavi.