I like the CLI. My counterpart likes ASDM. Sometimes when troubleshooting I need to see if he made any recent changes. What command(s) would I use in the CLI to see recent configuration changes made in the ASDM? Thank you so much, Alan
Forum Posts
Hello, I use Cisco ASA 5516-X with Firepower.After upgrade to Firepower Service 6.3.0 my Cisco Firepower Agent for AD can not connect to Firepower Services.6.2.x - work perfect.Error : Report login information from localhost to x.x.x.x failed aft...
Resolved! Question about SFR device bypass
Hello, I have an ASA 5545 with Firepower services, In the ASA we have the Service Policy Rule as show:From Lan Network to Management Network and viceversa then bypass,From any to any then send to the SFR device. In this case all the trafic that doesn...
Are WEBEX calls protected A, B or C classification?
Is this common(known) issue? When I configure one or two captures on the FTD(CLI or GUI) the device CPU increases by additional 20% even when the capture is full and Stopped/Paused.I really did not saw any difference if I change the captures buffer s...
Resolved! upgrade os a pair of ASA 5555-X
Hello,I have been asked to upgrade a pair of ASA 5555-X with FIREpower service, they are managed by a FMC, they active/standby, I would like to confirm with you guys if when I click install on the cluster the upgrade will be done automatically, 1) i...
Resolved! Radius requests from FTD over L2L tunnel
Hi,I have an ISE radius server on the other side of a L2L tunnel and I need to authenticate some RA VPN clients that's connecting to my local FTD 1010. If I test from a radius client on my network using a radius test tool, I have no problem reaching ...
Hi, What options (if any) are there for Virtual (VMWARE) Firepower Management Centre High Availability? I notice in the 6.1 release notes that only physical appliances are listed and the menu isn't available in my lab virtual appliance. - I'm looking...
Hi All, According to the latest FMC release, it should be compatible with On Premise ADFS SSO. Unfortunately, the available tech document show the integration with Azure ADFS only, May I have if any reference / example for on premise ADFS SSO integra...
HIwe are about to buy some cisco products which needs your consultation on some features.the products are as follows:1) C9800-L-F-K9 *1LIC-C9800L-PERF2) C9200-48P-E *1C9200L-DNA-E-48-5Y3) C9120AXI-H *32QUESTIONS:1- the first item(C9800-L-F-K9), is it...
Hello. I have two Firepower works on routing mode as showed on the diagram and client domain try access to the domain controller , the firepower 1 drop the DNS packet that returned by the domain controller after passed on the other firepower. based ...
Hi all,I'm going to deploy FTD HA managed by FMC and the license qty as below2 x Threat Protection2 x Malware Protection andCisco AnyConnect VPN Plus license for 1500 userHow should I perform license registration steps on FMC?Should I fist enabled Th...
Resolved! Upgrade ASA5510 to modern device
Hello, Friends! I need your advice.I use ASA5510 on the edge on network.(I have two offices and two devices)In plan, I want to update my old devices in next year.I can add, that I need IPSEC VPN and I need Anyconnect.So, how I understand, I can buy t...
Resolved! ASA 5520 - Cannot Ping LAN
Greetings,I recently acquired a 5520 ASA. I'm trying to integrate it into my environment but I am having a few issues.When I connect with my Anyconnect Client, I can ping my inside LAN GW (even pull up the web interface), but nothing else. I have a p...
Hi all, We are planning to configure Cisco AnyConnect VPN on our Firepower. And in front of our Firepower, there are two ISR routers that is doing NAT.What I would like to know is where should I configure NAT exemption? On firepower or on Router? As ...
