Can not use firepower interface

[Maivoko]

Originally follow manual can see firepower user interface in ASDM in ASA5506X

but after watch youtube tutorial

to set 

configure manager 192.168.1.1 keyisnotPAKbutmyimaginedtext

then ASDM firepower user interface disappear

how to make it appear again? 

[matty-boy]

If you want to manage your Firepower from an FMC then do as you said (and then add it to the FMC GUI)....

> configure manager x.x.x.x <key>

If you do not want to manage it from an FMC and you want to manage it locally from ASDM, then you need to revert what you did earlier with this command:

> configure manager delete

A Firepower can only be managed locally or by an FMC, not both.

Hope this helps,

Matt.

[Maivoko]

I have tried to delete and show managed locally

but there is no firepower tab in the left panel in ASDM

what should do I do next?

[matty-boy]

From the Firepower prompt, please reply with output from....

> show managers

[Maivoko]

Attached screen capture

[Abheesh Kumar]

Hi,
Now the Firpower is managed locally, please exit from ASDM and try to login again to see the firepower tab.

HTH
Abheesh

[Marvin Rhoads]

Try to launch ASDM from a different computer. If the Firepower menus show up from it, then you may need to delete the Java temporary files on the original computer.

[Maivoko]

I have exit and login again but same no firepower tab

what is directory of temporary java files ? Which files can be deleted?

[Abheesh Kumar]

before deleting java files try accessing from a different machine.

HTH
Abheesh

[Maivoko]

I do not have another machine , I have set do not keep temporary files in java setting

but still have not show the firepower tab

[Marvin Rhoads]

Can you confirm the ASA management interface is connected properly?

Also, please share "show module sfr detail".

The IP address of the module (as reported in that output) is what will appear on the ASA management interface and that address must be reachable from your PC that's running ASDM.

[Maivoko]

Port 3 and management port no light

[Marvin Rhoads]

Figure out why your management interface isn't connecting.

Until it does you will not be able to manage the Firepower module.

[Maivoko]

Firepower management interface appear

i discover management interface should not set management port

it should set inside