Cisco ASA 5510 fails boot
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
04-11-2013 05:27 AM - edited 03-11-2019 06:26 PM
Hello All,
I have a Cisco ASA 5510 with a strange issue. When I power it ON, the following is the status of the front panel LED:
Power is OFF
Status is Amber
Active is Amber
VPN is Green
Flash is OFF
Also nothing comes up on the console. I suspected a Power supply issue and replaced it, but still it doesn't seem to work.
I cant open up a TAC as I do not have a SmartNet contract.
Any help in this regard would be appreciated.
Regards,
Franklin John.
- Labels:
-
NGFW Firewalls

- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
04-11-2013 06:26 AM
Hi Franklin,
Please try replacing the memory(RAM) of the device(if you have any spare one).
-Akshay
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
04-12-2013 01:26 AM
Hi Akshay,
Thanks for the reply, but changing the RAM did not solve the issue.
Is there any other thing that I can test, let me know.
Regards,
Franklin John.
