cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
623
Views
0
Helpful
4
Replies

Group failover happing automatically on ASA 8.0.5 23

vinayak2010
Level 1
Level 1

Hi,

We are having ASA 5550 running on 8.0(5)23 IOS. We are having 2 failover groups group1 & group2.

currently all contexts are on group1 & its active & Group2 is in BulkSync mode

but from last 2 days the failover for group 2 is happning, i am not able to find anything in logs. Its happing daily from 2 days.

Can anyone help me to troubleshoot this issue?

Thanks in advance.

4 Replies 4

Julio Carvajal
VIP Alumni
VIP Alumni

Hello

Can you do a show failover history and let's us know what you get?

Regards,

Julio

Julio Carvajal
Senior Network Security and Core Specialist
CCIE #42930, 2xCCNP, JNCIP-SEC

Hi,

Output of Show failover history is as follow:

==========================================================================

Group     From State                 To State                   Reason

==========================================================================

04:28:51 CEST Nov 8 2012

    2     Not Detected               Disabled                   HA state progression failed

04:28:51 CEST Nov 8 2012

    2     Disabled                   Negotiation                Failover state check

04:28:52 CEST Nov 8 2012

    2     Negotiation                Cold Standby               Detected an Active mate

04:28:52 CEST Nov 8 2012

    2     Cold Standby               Sync Config                Detected an Active mate

04:28:52 CEST Nov 8 2012

    2     Sync Config                Sync File System           Detected an Active mate

04:28:52 CEST Nov 8 2012

    2     Sync File System           Bulk Sync                  Detected an Active mate

05:54:18 CEST Nov 8 2012

    2     Bulk Sync                  Not Detected               HA state progression failed

05:54:18 CEST Nov 8 2012

    2     Not Detected               Disabled                   HA state progression failed

05:54:18 CEST Nov 8 2012

    2     Disabled                   Negotiation                Failover state check

05:54:19 CEST Nov 8 2012

    2     Negotiation                Cold Standby               Detected an Active mate

05:54:19 CEST Nov 8 2012

    2     Cold Standby               Sync Config                Detected an Active mate

05:54:19 CEST Nov 8 2012

    2     Sync Config                Sync File System           Detected an Active mate

05:54:19 CEST Nov 8 2012

    2     Sync File System           Bulk Sync                  Detected an Active mate

07:19:44 CEST Nov 8 2012

    2     Bulk Sync                  Not Detected               HA state progression failed

07:19:44 CEST Nov 8 2012

    2     Not Detected               Disabled                   HA state progression failed

07:19:44 CEST Nov 8 2012

    2     Disabled                   Negotiation                Failover state check

07:19:45 CEST Nov 8 2012

    2     Negotiation                Cold Standby               Detected an Active mate

07:19:45 CEST Nov 8 2012

    2     Cold Standby               Sync Config                Detected an Active mate

07:19:45 CEST Nov 8 2012

    2     Sync Config                Sync File System           Detected an Active mate

07:19:45 CEST Nov 8 2012

    2     Sync File System           Bulk Sync                  Detected an Active mate

==========================================================================

vinayak2010
Level 1
Level 1

Hi All,

Can anyone please help me out.

Hi,

If you can make no failover at both.

Be sure of the failover interface, then failover again.

Sometimes even you need to reload, then do the failover.

Regards,

MKD

Review Cisco Networking for a $25 gift card