11-24-2008 06:40 AM - edited 03-11-2019 07:17 AM
Hi,
Can someone tell me the commands/access-lists on PIX to allow the below:
source: 10.10.2.3
destination: x.x.x.20
ports: 21,23,1530, 18102, 18103
Please give me the commands to run on PIX?
Regards,
Vin
Solved! Go to Solution.
11-24-2008 06:50 AM
Vinay,
access-list 150 permit tcp host 10.10.2.3 host x.x.x.20 eq 21
access-list 150 permit tcp host 10.10.2.3 host x.x.x.20 eq 23
access-list 150 permit tcp host 10.10.2.3 host x.x.x.20 eq 1530
access-list 150 permit tcp host 10.10.2.3 host x.x.x.20 eq 18102
access-list 150 permit tcp host 10.10.2.3 host x.x.x.20 eq 18103
Regards,
Arul
*Pls rate if it helps*
11-24-2008 06:50 AM
Vinay,
access-list 150 permit tcp host 10.10.2.3 host x.x.x.20 eq 21
access-list 150 permit tcp host 10.10.2.3 host x.x.x.20 eq 23
access-list 150 permit tcp host 10.10.2.3 host x.x.x.20 eq 1530
access-list 150 permit tcp host 10.10.2.3 host x.x.x.20 eq 18102
access-list 150 permit tcp host 10.10.2.3 host x.x.x.20 eq 18103
Regards,
Arul
*Pls rate if it helps*
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide