08-21-2016 11:05 PM - edited 03-12-2019 01:09 AM
Steps away from exam & got struck in routing of asa & router. checked the document. still getting issue.
08-21-2016 11:22 PM
Your ASA does not have static routes for 192.168.1.0 /24 and 192.168.2.0 /24. It will need them to know where to direct 'return' traffic.
Of course, that depends on how your NAT is configured...
08-21-2016 11:25 PM
its in place. Not added in images.
About nat, able to ping from outside to inside if RIP is configured. But not with static routes.
08-21-2016 11:29 PM
Maybe include a traceroute and running-config?
08-21-2016 11:33 PM
ok. I"ll check. Using in GNS3. VPCS gives asterisks sometime. so not able to make out.
Thanks for guidance.
08-22-2016 04:50 AM
Mainly concentrating on outside to inside communication. So keeping aside dmz, checked. but now working.
Considering RIP enabled, If inside router is having 192.168.x.x series, & pinging from outside, I can ping till router fa 0/0. not able to reach fa 1/0.
Static route is not at all working.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide