(Live Webcast Thursday February 28, 2019 at 9 am Pacific/ 12 pm Eastern / 6 pm Paris)
This event had place on Thursday 28th, February 2019 at 9hrs PDT
In this event, Hall of Fame Member Peter Paluch and Cisco Designated VIP David Peñaloza talk about Enhanced Interior Gateway Routing Protocol (EIGRP) fundamentals. The session seeks to clarify the status and fundamentals of the EIGRP protocol. In addition, the experts discuss the common steps used to troubleshoot operations and common issues with EIGRP.
Review of EIGRP fundamentals
Recent advances and features in EIGRP
Troubleshooting tips and tricks
Peter Palúch is a Customer Support Engineer in the EMEA High-Touch Support CX team with a focus on Data Center Switching technologies. In his free time he indulges in all technologies, particularly routing protocols, routed technologies, and MPLS-based services. Before Peter joined Cisco, he worked as a university professor and a Networking Academy instructor and instructor trainer. Peter is an author of the Cisco Press title “CCIE Routing & Switching v5.0 Official Certification Guide, Volume 1”. He holds a CCIE certification on R&S #23527.
David Samuel Peñaloza Seijas works as a Senior Network Consulting Engineer at Verizon Enterprise Solutions in the Czech Republic. Previously, he worked as a Network Support Specialist in the IBM Client Innovation Center in the Czech Republic. David is an expert interested in all topics related to networks. However, he focuses mainly on data centers, enterprise networks, and network design, including software-defined networking (SDN). David has a long relationship with Cisco. He has been a Cisco Instructor for the Cisco Academy and was recognized as a Cisco Champion and aCisco Designated VIPfor 2017, 2018 and 2019. David holds a CCNP R&S, CCDP, CCNA Security, CCNA CyberOps and a CCNA SP certification.
Hello. I have a Catalyst L3 switch facing two ISPs using BGP (one ISP as primary and the other as backup), and the keepalive and holdtime are the defaults. I need to reduce this timers (keepalive 20 seconds, holdtime 60 seconds) in order to get a faster r...
I have my two switches prepped to go from 3.7.3 to 3.8.8. Have the image in both bootflash: and slavebootflash: and config-reg set to 0x2102 (actually 0x102 before reload). VSS and NFS are configured, and working, but the stack has not been rebooted in ov...
Hello All, The data retention for AP Radio Downtime Summary seems to be around 2 months. I would like it to be at least 6 months. I have read https://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-4/admin/guide/bk_CiscoPrimeI...
All,Checking in with a request for feedback regarding use of the spanning-tree link-type point-to-point command and its uses. For configuration samples, when and where is the command used and is it possible to see it only at one end of a switch to s...
I would like some guidance on QoS/Auto-QOS on the 2960-L.Image is c2960l-universalk9-mz.152-6.E.binFeature Navigator says various QoS/Auto-QoS features are supported;Auto QoS 1.5, Auto QoS - VoIP, Auto QoS VoIP enhancement.I have a LanLite right-to-u...