Just configured this static route:
RP/0/0/CPU0:XR-0-PE#show run router static
Tue Jun 13 09:26:09.855 UTC
router static
vrf mgmt
address-family ipv4 unicast
0.0.0.0/0 172.16.1.1
!
!
!
RP/0/0/CPU0:XR-0-PE#
But when I do a sync-from, NSO doesn't pull it from the router. Basically no 'router static' configuration path:
admin@ncs> request devices device XR-0 sync-from
result true
[ok][2017-06-13 12:32:38]
admin@ncs> show configuration devices device XR-0
address 172.16.1.10;
port 22;
ssh {
host-key ssh-rsa {
key-data "AAAAB3NzaC1yc2EAAAADAQABAAABAQC12PbaBSkNvWEzBE4HE/ekDACNPXy+2tZRKFAfYpNu\n/zP4fhi0NNEQZRG3y6CFCBQyKgDTJ+fGvJFpATC7L4KyczyxWupKDKFwA9dOiPf827vHeEq0\n+PxrsadX9bBbqwXwSqhsZf67gUbbyVCyMPOcycbMcdrcIWi4avQbIuG05PAwL63QH9mgVg+X\nnuxaF/Hm8pFcIc8eKhxJ2opgRwoCeBq76OnmI24azrnpUX5ZsbKHQS0LApcjVViouiJ1JhM1\nWcMiwdoYK50hRpn8lXeuGSOi+cdGf3i/6LeTo8Nk2SOB94dRaLiYOac78hMoLGFNnwvsMWd8\nZGJal7emPNr7";
}
}
authgroup mygroup;
device-type {
cli {
ned-id cisco-ios-xr;
}
}
state {
admin-state unlocked;
}
config {
cisco-ios-xr:hostname XR-0-PE;
cisco-ios-xr:vrf {
vrf-list mgmt {
address-family {
ipv4 {
unicast;
}
}
}
}
cisco-ios-xr:domain {
name mnet.com.mx;
}
cisco-ios-xr:mpls {
ldp {
router-id 10.0.0.10;
interface GigabitEthernet0/0/0/0.1;
}
}
cisco-ios-xr:ssh {
server {
vrf default;
vrf mgmt;
}
}
cisco-ios-xr:interface {
Loopback 0 {
ipv4 {
address {
ip 10.0.0.10;
mask 255.255.255.255;
}
}
}
MgmtEth 0/0/CPU0/0 {
ipv4 {
address {
ip 172.16.1.10;
mask 255.255.255.0;
}
}
vrf mgmt;
}
GigabitEthernet 0/0/0/0.1 {
ipv4 {
address {
ip 10.10.11.10;
mask 255.255.255.0;
}
}
encapsulation {
dot1q {
1011;
}
}
}
}
cisco-ios-xr:router {
ospf 1 {
router-id 10.0.0.10;
area 0 {
interface GigabitEthernet0/0/0/0.1 {
network point-to-point;
mtu-ignore {
enable;
}
}
interface Loopback0 {
passive {
enable;
}
}
}
}
bgp {
bgp-no-instance 1 {
address-family {
ipv4 {
unicast;
}
vpnv4 {
unicast;
}
}
}
}
}
}
[ok][2017-06-13 12:32:56]
admin@ncs>
