can i plug CVR-QSFP-SFP10G to 93108TC-FX3P ?

[Kasun Bandara]

Dear all,

can i plug CVR-QSFP-SFP10G to 93108TC-FX3P ? and use that to connect 10G-SR?

[marce1000]

          - Verify with : https://tmgmatrix.cisco.com/

 M.

[Kasun Bandara]

Hi @marce1000,

https://tmgmatrix.cisco.com/?si=CVR-QSFP-SFP10G not gives any details. 

[marce1000]

 - You can also enter your switch model , it seems to be supported , check attachment :

 M.

[Kasun Bandara]

Hi @marce1000 ,

I have tried same. but still not mention about converter. i found this on CCW and it is configurable. but need to know when concerning 1G connectivity. if any experienced. Thank you for suggestions

[balaji.bandi]

93108TC-FX3P - its fixed ports with 40/10GB uplink ports. I believe as i remember I had some issue of compatibility, so I have to move to Twinax cable to connect 2 devices (my case)

[Kasun Bandara]

Hi @balaji.bandi 

what was your setup? i need to get 2 x 10G fiber links to out of switch. can you let me know exact devices and modules used?

[balaji.bandi]

This what i used end up with 40G DAC cable - https://copi.cisco.com/?tpid=163

There is breakout cable from 40G to 4 x10G ports - QSFP-4X10G-AC10M 

[Kasun Bandara]

Thanks @balaji.bandi , i am looking to get 10G optical out from switch. converter available to configure on CCW. but not sure about practical success.

[balaji.bandi]

I am afraid i can offer any solutions.