Cisco MDS 9706 and GigE Copper SFP

[msingh08]

Hello Folks,

This is an inquiry for the Cisco MDS 9706.  I need to connect the FCIP Extension Blade thru to a 10BaseT LAN -- copper fabric.

Can I include the GigE Copper SFP in the configuration?

Thanks in advance..

[balaji.bandi]

10BaseT LAN  - not sure never tried my self less than 1GB connection in DC environment, other than only management port i know that support 10/100/1GB.

if you have access to the device you need to try and test it - GLC-T do support 10MB (not sure if that work for your requirement or not)

Cisco 1000BASE-T SFP modules support 10/100/1000 auto-negotiation and Auto MDI/MDIX.

[msingh08 · Accepted solution]

Hello Balaji, thanks a ton for looking into it...

May I know the supported speed from GigE Copper SFP please. is it 1G or10G ?

Thanks for your time..

[balaji.bandi]

GLC-T i have provided the information :

Cisco 1000BASE-T SFP modules support 10/100/1000 auto-negotiation and Auto MDI/MDIX.