02-17-2021 12:37 AM
Hello Folks,
This is an inquiry for the Cisco MDS 9706. I need to connect the FCIP Extension Blade thru to a 10BaseT LAN -- copper fabric.
Can I include the GigE Copper SFP in the configuration?
Thanks in advance..
Solved! Go to Solution.
02-17-2021 03:05 AM
Hello Balaji, thanks a ton for looking into it...
May I know the supported speed from GigE Copper SFP please. is it 1G or10G ?
Thanks for your time..
02-17-2021 01:45 AM
10BaseT LAN - not sure never tried my self less than 1GB connection in DC environment, other than only management port i know that support 10/100/1GB.
if you have access to the device you need to try and test it - GLC-T do support 10MB (not sure if that work for your requirement or not)
Cisco 1000BASE-T SFP modules support 10/100/1000 auto-negotiation and Auto MDI/MDIX.
02-17-2021 03:05 AM
Hello Balaji, thanks a ton for looking into it...
May I know the supported speed from GigE Copper SFP please. is it 1G or10G ?
Thanks for your time..
02-17-2021 03:25 AM
GLC-T i have provided the information :
Cisco 1000BASE-T SFP modules support 10/100/1000 auto-negotiation and Auto MDI/MDIX.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide