using GLC-SX-MM with SG220-26P

[baselzind]

can i use GLC-SX-MM with SG220-26P as I'm not able to find the official one MGBSX1-RF? will it cause future issues if i tested it and it work?

[Flavio Miranda]

Hi

  The list of supported SFP is down below. I dont believe the SFP you mentioned will work but for sure will cause no problem if you plug and test. I tested many SFPs in different switches and what happen is it doesnt work and that all. 

Supported SFP Modules	SKU	Media		Speed	Maximum distance
	MGBSX1	Multimode fiber		1000 Mbps	550 m
	MGBLX1	Single-mode fiber		1000 Mbps	10 km
	MGBLH1	Single-mode fiber		1000 Mbps	40 km
	MGBBX1	Single-mode fiber		1000 Mbps	40 km
	MGBT1	UTP Category 5

[marce1000]

         - Supported ones can be found in this list : https://tmgmatrix.cisco.com/?npid=3406

 M.

[Kasun Bandara]

like others said, this SFP not in compatible list.

recommendation is to use compatible SFP with switch given under @marce1000 link.

but practically i have uses GLC_SX_MMD with SMB series. you can try if you have SFP on hand, but cannot guarantee because officially its not in compatible list.