02-23-2004 03:44 PM - edited 03-13-2019 03:58 AM
Hi All,
I got a new cisco Wireless 7920 IP Phone, but I could not configure it:
(1) Select Network config, Only got "Current Config", "MAC address" and "Site Survey" but no other options available.
(2) Select Profiles, got "Not Available" message
(3)Select Phone Settings: only "Phone Status" available. No other options such as USB Enable/Disable, Factory Default.
How can I enable or get the other options? Do I need the Cisco 7920 utility software with USB Cable connected to PC to solve this problem?
The Firmware version is 7920.3.3-02-01-207.
Hardware version: 1.0
Thanks in advance.
Joe
02-23-2004 08:28 PM
I figured out the configuration options.Thanks
03-02-2004 11:12 AM
Sorry I did not tell the solution of this.
When coanfigure the 7920 IP phone, you need to go to the administrative mode. There is no need to have the USB cable for this.
The url tells you how to get the administrative mode.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide