06-16-2005 09:54 AM - edited 03-13-2019 09:30 AM
Has anyone run across this? We have 3 7936 phones in conference rooms. When we place calls on any of these sets, the connection is made and the remote party can hear us, but not vice-versa. We cannot hear the remote party through the 7936. The phones were reset and the problem went away. Any ideas? I'm running CCME 3.2.1 on a 2811 router.
06-22-2005 08:52 AM
Configure 'voice rtp send-recv'
Because voice path is established in the backward direction as soon as the RTP stream is started. The forward audio path will not be cut-through until the Cisco IOS gateway receives a Connect message from the remote end. In some cases it is necessary to establish a two-way audio path as soon as the RTP channel is opened.
07-06-2005 10:01 AM
I have the same issue with ccm 3.3(4) sr2. mcs-7825 pub and subs.the issue is within the same subnet. any suggestions
04-12-2010 08:51 AM
hi, did you fix the issue ?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide