A question about DMM hardware.

[akalinnikov]

Hi, folks! I have Cisco MXE3500, Cisco DMM (HP DL380G6), Cisco SnS (wave 754).

Cisco MXE has three gigabit ethernet interfaces, Cisco DMM four, Cisco SnS two. I wanted to ask if these devices support link aggregation (LACP).

Thanks in advance.

[Daniel Arrondo Ostiz · Accepted solution]

Hi Alex,

I'm afraid the short answer is no.

For the DMM and SnS, only one single interface can be used. On the MXE, you can use multiple interfaces simultaneously as long as they are in different subnets.

Regards

Daniel

[akalinnikov]

Daniel, thanks for the answer!