04-23-2002 04:12 AM - edited 03-12-2019 03:14 PM
Hi ALL !
From Cisco.com:
C549 technology is available to support either medium complexity codecs or high complexity codecs.
C549 voice cards support four voice/fax-relay calls per DSP with medium complexity codecs.
C 549 voice cards support two voice/fax-relay calls per DSP with high complexity codecs.
We have VFC board:
show vfc 1 board
VFC board state is UP, vfc status VCWARE running(0x4)
VFC board in slot 1 with 30 dsps
Does this VFC board support max 120 simultaneous calls
with g729r8 codec ?
Thanks for ALL !
04-23-2002 05:56 AM
I could be wrong, but that sounds right to me. g729r8 is a medium complexty codec and if you have 30 dsps and 4 calls a dsp you would be 120.
Hope this helps,
-Mckee
04-23-2002 07:54 PM
Can't tell from this. Do a 'sh vfc 1 dir' to see what DSP code the voice card is running. The filename will tell you if it is running C542 or C549 DSPs. If you have C549's and a 4 port E1 card, then you should be able to make 120 calls using medium complexity (G729/G711) codecs.
12-23-2010 05:46 PM
hi, Sir :
why i cann't use the command show vfc in my router 3845, IOS is 12.4(24), what's the command is familiar to show vfc
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide