03-17-2006 07:02 AM - edited 03-13-2019 12:35 PM
Hi all. I have problem with "hold" feature on CCM 4.1(3)SR3. Pressing HOLD softkey during active call cause disconnect of call.
I tried to debug (debug voice ccapi detail) this situation on voice GW (see attach) and received " DisconnectText no resource (47)"
1BA : 2106 198143480ms.1950 +3060 19540 pid:200 Originate 43
dur 00:00:16 tx:218/34880 rx:218/34880 2F (no resource (47))
IP 10.10.0.42:20192 SRTP: off rtt:0ms pl:0/0ms lost:0/0/0 delay:0/0/0ms g711alaw
media inactive detected:n media contrl rcvd:n/a timestamp:n/a
1BA : 2105 198143450ms.1951 +3110 +19600 pid:989 Answer 257111392
dur 00:00:16 tx:218/34880 rx:218/34880 2F (no resource (47))
IP 213.235.87.71:18610 SRTP: off rtt:0ms pl:0/0ms lost:0/0/0 delay:0/0/0ms g711alaw
media inactive detected:n media contrl rcvd:n/a timestamp:n/a
Any idea ??? Thanks Miroslav
03-17-2006 07:16 AM
Please take a debug q931 of the issue, if you see the following:
Out Message -- PriNotifyMsg -- Protocol= PriDmsProtocol
Ie - Ni2ConnectedNumIe IEData=
***Message - Missing Mandatory IE in Sdl Message
Please upgrade to CCM sr3a
03-19-2006 11:38 PM
Sorry, I wrote is wrong. I am using SR3a yet :o(
Miroslav
03-20-2006 09:38 AM
Yikes! That's a spooky bug. :-( I would imagine that it isn't happening to a lot of people but I'm very interested to hear what's causing this.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide