07-24-2006 04:38 AM - edited 03-13-2019 02:18 PM
hi!
my cm ver is 4.1.3 and,
phone ver is 8.0.3. phone model is 7961.
after reset via callmanager admin,
any phones do not registered.
at phone's web page, i saw debug message.
message is " cm-closed-tcp".
it means cm do not permit tcp 2000 with phones.
why does CM send message ?
thanks.
07-24-2006 05:22 AM
I believe the CM-Closed-TCP message you see is because the phone lost TCP connection with the CallManager when you reset the CM.
As far as why phones aren't registering, is TFTP serer up? Is there connectivity from the cm to the phones? is the CM service running?
07-24-2006 05:40 PM
of course. tftp server is up.
only,i reset via cm. cm service is good.
thanks.
07-24-2006 07:01 PM
If you have DHCP set up with an array of TFTP servers, make sure you have a reference to ALL the servers that are running TFTP in both the array and your router / switch config if you are running DHCP from your IOS.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide