04-12-2005 07:12 AM - edited 03-13-2019 08:42 AM
Hi!
I set up CallManager express with H.323 VoIP connection to provider (public telephone networks). I need to deploy auto-attendant feature, its_Cisco.2.0.1.0.tcl script. I linked this application to my incoming VoIP dialpeer but it doesn't work. May be anyone knows is it possible to use this TCL script on incoming VoIP dialpeer or it can be connected only to the PSTN dialpeer.
Thanks.
Configuration of CME follows:
call application voice autoatt flash:its-CISCO.2.0.1.0.tcl
call application voice autoatt operator 135
call application voice autoatt aa-pilot 199
call application voice autoatt language 1 en
call application voice autoatt set-location en 0 flash:
call application voice autoatt event-log
dial-peer voice 6667 voip
application autoatt
incoming called-number xxxxxxx
dtmf-relay h245-alphanumeric
codec g711ulaw
no supplementary-service h450.2
no supplementary-service h450.3
04-12-2005 01:30 PM
I tried this a while back and it didn't work until I reverted to the version of IOS (well, the next maintenance release of it anyway) stated in the readme that comes with the script.
Might not be possible for you to do this tho.
Aaron
04-14-2005 11:48 PM
As far as I know, the auto attendant just works for pots dial peers.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide