Hi Guys,is there any way to upgrade an SPA942 to firmware version 6.15?As it is EOS, the link to software upgrade is no longer available... Can I find it somewhere else? Thanks!Enric
Hi Guys,is there any way to upgrade an SPA942 to firmware version 6.15?As it is EOS, the link to software upgrade is no longer available... Can I find it somewhere else? Thanks!Enric
I have the topology attached below, with 2 routers on the core and some remote routers connected with 1 gre tunel to each one of the core and a ddr backup to one of them.I've configured ospf and demand circuit for the backup link. (i also attach the ...
I've just set up an auto attendant in my CCME v3.1 and I have a problem with the initial audio prompt (the welcome message). When the auto attendant starts I just can hear the last seconds of the welcome message; I mean: if the message says "Welcome ...
Hi, is there a way to purchase (or get) an Spanish pre-established ivr auto-attedant script + au files?I mean, the same sort of script we have in english in the cme-aa-2.0.1.0 package but trasnlated into Spanish...thanks - Enric
Thanks Jody, but I've already have this software. The problem is in the firmware to be downloaded following the installations instructions included there. That is:STEP 1 Download the firmware from Cisco.com. Go to: (THESE LINKS DON'T WORK ANY MORE)SP...
Dialer list 1:access-list 100 deny udp any any eq ntpaccess-list 100 deny udp any any eq syslogaccess-list 100 deny udp any any eq snmpaccess-list 100 deny ip any host 255.255.255.255access-list 100 permit ip any anydialer-list 1 protocol ip ...
Hi Rick,the problem is the following: once I activate ospf on the dial interface, the link goes up and stays up.The complete config is the following:interface BRI0 no ip address encapsulation ppp dialer pool-member 2 isdn switch-type basic-net3!inter...
Thanks Ruedi. it almost worked! I eventually passed the 'loading...' page and even got the Cisco Router Web Setup home page. But it keeps issuing html errors and gets blocked in the dialog box 'Checking Router model and IOS version and feature set'. ...
