11-05-2005 12:03 AM - edited 03-13-2019 11:06 AM
Hi People
Please help me how to configure 2MFT-E1-DI for voice only ISDN PRI with 2600 router.
Do I need to obtain any IP from telco..please guide me what things I need to obtain form telco and configure.
Thanks people
11-07-2005 07:49 AM
Hi,
U need not require the IP from the service provider for E1(VOICE).
U only need to know the framing standard that is provided SP,linecode,clock source and lastly but the most imp the isdn-switch type.
Make sure u know how many channels to bring up and u have the sufficient DSP resources
Hope this helps
Abhishek
11-10-2005 12:31 AM
Hi Abhishek,
Fowllowing is the router configuration I made and respective show commands.
For loopback testing purpose I assigned Ip addressed to D channel as 10.46.10.1.The result that also appended at end of attachement.
DSP wise its OK.
It seems my configuration is right somewhere went wrong.what to do further.
thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide