10-28-2010 01:26 AM - edited 03-13-2019 07:12 PM
Hi
i have a couple of questions regarding this,
when i had installed the pvdm3-64 module on an 2921 running a cme , do i need to configure anything else or the resources are already aviable?
And could anyone post a link for the phisycal instalation guide od the ism-sre-300-k9 on a 2921, because im no been able of findinf it.
thankn in advance
Cesar
Solved! Go to Solution.
10-29-2010 06:16 AM
Same as ny other CUE
Make ip addres unnumbered from the voice vlan interface.
service-module use an address from same subnet.
static route /32 pointing to ism0/0
That is also in the guide.
10-28-2010 05:31 AM
q1: no
q2: 2921 hardware installation guide, "installing internal modules".
10-28-2010 11:55 AM
actually the installation went ok, but im unable to ping the service module
interface ism 0/0
ip address 10.0.0.1 255.255.255.0
service-module ip address 10.0.0.2 255.255.255.0
service-module default gateway 10.0.0.1
anything wrong in here?, actually its traight from the configuration guide
regards
Cesar
10-29-2010 06:16 AM
Same as ny other CUE
Make ip addres unnumbered from the voice vlan interface.
service-module use an address from same subnet.
static route /32 pointing to ism0/0
That is also in the guide.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide