05-09-2011
03:34 PM
- last edited on
03-25-2019
07:00 PM
by
ciscomoderator
Maybe it's just me but wouldn't you think a "Factory Reset" would clear all non-factory stuff out?
The Factory reset is NOT clearing the usb_1 directory out.
Is this by design?
Is there something besides below to clear it out?
https://supportforums.cisco.com/docs/DOC-14065
I've tried holding the reset key down for a longer period and that didn't seem to clear it out.
Any thoughts?
TIA
Solved! Go to Solution.
05-10-2011 06:15 AM
Marc,
The Factory reset or Restore to Factory defaults is geared towards the "Configuration" of the DMP. The contents within flash are not removed as you have seen. The FAQ that you reference is a good way to remove the files if so desired. So the DMP is working as designed.
If this answers your question, Please take time to mark this
discussion answered & rate the response.
Thank You!
T.
05-10-2011 06:15 AM
Marc,
The Factory reset or Restore to Factory defaults is geared towards the "Configuration" of the DMP. The contents within flash are not removed as you have seen. The FAQ that you reference is a good way to remove the files if so desired. So the DMP is working as designed.
If this answers your question, Please take time to mark this
discussion answered & rate the response.
Thank You!
T.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide