cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
436
Views
5
Helpful
4
Replies

Faxing through MGCP

hwilms
Beginner
Beginner

Hello

We are having issues with faxing through a PRI on a 4506 AGM module, configured MGCP with CCM 3.33. The faxes are (incoming and outgoing) cutting off in mid stream. Any assistance would be great

4 Replies 4

What fax protocol (relay/passthru) do you use?

What gateways are you using for connection to the PSTN/to faxes?

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!

PRI and FAXES are on cat 4507 with WS-x4604-GW AGM module configured as MGCP. and using passthrough.

Some faxes and modem are also on VG224

ccm-manager fallback-mgcp

ccm-manager redundant-host 10.128.5.3

ccm-manager mgcp

no ccm-manager fax protocol cisco

ccm-manager music-on-hold

ccm-manager config server 10.128.5.3

ccm-manager config

mgcp

mgcp call-agent 10.128.5.4 2427 service-type mgcp version 0.1

mgcp dtmf-relay voip codec all mode out-of-band

mgcp rtp unreachable timeout 1000 action notify

mgcp modem passthrough voip mode nse

mgcp modem passthrough voip codec g711alaw

mgcp package-capability rtp-package

no mgcp package-capability res-package

mgcp package-capability sst-package

mgcp package-capability pre-package

no mgcp timer receive-rtcp

mgcp sdp simple

no mgcp fax t38 ecm

mgcp fax t38 inhibit

mgcp bind control source-interface GigabitEthernet0/0

mgcp bind media source-interface GigabitEthernet0/0

ROBERT Clark
Beginner
Beginner

Check to see if you are having slips on your PRI. Fax transmission seem to be very susceptable to timing slips.

hth,

-rob

Yes, I am seeing slips on both PRI's

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers