09-23-2004 11:39 AM - edited 03-13-2019 06:26 AM
trying to find a link which describes the four types switchback method for mgcp: immediate, delayed, graceful and scheduled. Anybody can help me out? Thanks
09-23-2004 12:54 PM
Unless this helps!
a. gracefulCompletes all outstanding calls before returning the gateway to the control of the primary Cisco CallManager server.
b. immediateReturns the gateway to the control of the primary Cisco CallManager server without delay, as soon as the network connection to the server is reestablished.
c. schedule-time hh:mmReturns the gateway to the control of the primary Cisco CallManager server at the specified time, where hh:mm is the time according to a 24-hour clock. If the gateway reestablishes a network connection to the primary server after the configured time, the switchback will occur at the specified time on the following day.
d. uptime-delay minutesReturns the gateway to the control of the primary Cisco CallManager server when the primary server runs for a specified number of minutes after a network connection is reestablished to the primary server. Valid values are from 1 to 1440 (from 1 minute to 24 hours).
09-24-2004 07:42 AM
So all these are refering to restore the connection back to the primary when the primary comes back, not how to switch to the 2nd when primary failed. So any one of the 4 options, the current call will still be maintained. Somebody confused me saying that: when the primary failed, if switch to 2nd ccm immediately the current call will be dropped. I said that won''t happen because of the Q931 backhauland I never seen this happened on the field. So you confirmed what I thought. thanks a lot.
09-24-2004 08:42 AM
Hello ,
As far as I understand the curren call status will be maintained for T1 CAs and FXS and FXO ports and not for T1/E1 PRI.
Also yes this command only says how the switchback happens to the main server.
Yes there is one more command in the previlage mode "ccm-manager switchover-to-backup" which allows the forceful switch over of primary to backup server.However this will not happen if ccm-manager switchback immediate is configured.
I hope this helps.
Thanks,
Radhika
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide