09-01-2005 03:09 AM - edited 03-13-2019 10:21 AM
Hi,
Is it possible to hide the outbound CallerID to the PSTN for a specific line/phone without having to create them a new CSS and a translation pattern that Restricts the presentation?
I can't find a "Hide Caller ID" checkbox - which would have been useful :-)
Thanks,
Peter
09-07-2005 01:14 PM
I don't think this option is available.
09-15-2005 09:08 AM
You could create a translation pattern. for example
*80.xxxx (based on 4 digit dial plan)
description: Hide Caller ID
partition: none
css: whichever you choose
route option: route this pattern
using calling party external mask: uncheck
discard digits: pre dot
******Be aware that this will cause delay when dialing any 80xx numbers
09-15-2005 05:37 PM
In CCM, under phone line setting you can set external number mask to anything you want (ex. 8888888). Will that work for you?
09-16-2005 12:04 AM
Our telco will allow anything we put in the CLID to be sent, but I can't find a way to have nothing. If the external mask is blank then it just looks to the mask on the gateway.
I have got round it by translating the numbers on the h323 gateway itself, but would still be interested to hear if there is a newater solution.
Thanks,
Peter
10-30-2005 09:07 PM
Hi Peter,
Can you please kindly give an e.g. on how this can be done on the H323 gateway?
Thanks.
Hunt
10-31-2005 12:08 AM
Hi Hunt,
Here is an example of hiding the CLID for certain DNs on an H323 gateway:
!
voice translation-profile HideCLID
translate calling 100
!
voice translation-rule 100
rule 1 /2077092206/ //
rule 2 /2077092108/ //
!
voice-port 2/0:15
translation-profile outgoing HideCLID
!
The problem with this is that you can only have 15 rules in a translation-rule, and so only perform this operation for 15 numbers(or patterns if your numbering scheme allows) per voice-port.
If you find a better way of doing this please let me know as I'm sure it must exist :-)
Peter
10-31-2005 10:09 AM
Try this option.
1. Check the "Use Calling Party's External Phone number mask" at the Route Pattern/Route List level.
2. At the gateway level, leave the Caller ID blank.
3. At the phone level, enter the "External Phone number mask" only to the phones you would like the Caller ID to be displayed. For the phones you would like to Hide Caller ID, leave it blank.
Since you would need to do this per phone, it might be challenging if you have a large number of phones to take care of.
HTH
Anup
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide