How to busyout B-channels on T1-PRI with MGCP and CCM4.1.3

[amvita]

I need to busyout the b-channels on all the T1-PRI's on a WS-SVC-CMM Cat6k voice linecard. I have these configured using MGCP signaling with CCM 4.1.3sr4d

There are active calls on the T1's and I would like to busyout the channels when the call completes.

Any help is greatly appreciated.

[arcaidy76 · Accepted solution]

See if this helps.

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a008076f8d2.shtml