10-04-2005 09:54 AM - edited 03-13-2019 10:44 AM
I am looking to enable presence and "click-to-dial" functionality inside of Microsoft Communicator (the client for LCS 2005) for CallManager 4 based phones.
10-10-2005 11:06 AM
11-04-2005 09:37 AM
I am also interested in this. A client of mine has deployed Microsoft Communicator and wants to integrate this. Has anyone gotten this to work with Callmanager 4.1?
01-10-2006 09:55 AM
hello!
this link might help you!
you must have ccm 4.1.3 sr2 to make this integration.
I have started trying it, but at the moment, there are some troubles with it. no service interruption, but integration is not working at the moment.
maybe i am going to open a new post on my questions. if yes, i will post a link to my post here
best regards
markus
01-25-2006 09:50 AM
Hi all!
I'm trying also this scenario. I followed the PDF documento from Cisco, but... I think that I'm near to achieve the goal, but I have a problem: in the MOC to IPPhone calling scenario, the IP Phone register the call (it appears a missing call) but it only rings less than a second and the call hans up. Inverted scenario (from IP Phone to MOC) doesn't work at all: I get the busy tone.
Some of you have faced to this problem? Any idea about the solution?
Thanks in advance.
03-04-2006 08:45 AM
I have exactly the same requirement, and same problem as last post. I have configured a SIP Trunk in CCM 4.1.From MOC I can initiate a call and the Cisco desk phone rings for half a second then seems to reject the call.
Does anyone have any further information on how to use MOC as a softphone for CallManager through LCS 2005?
By the way, the link to the PDF document above doesn't seem to work. Can someone update with a live document for me?
06-13-2006 06:35 AM
Can somebody repost the pdf url? The link is no longer valid.
Thanks,
Peter
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide