01-12-2004 02:54 PM - edited 03-13-2019 03:18 AM
We have a CM 3.14(b), we have an extension number asigned for meet-me, the problem is when i dial from PSTN to this extension number, hardly ever the call is connected, the question here, is possible dial from PSTN to meet-me extensión?
01-12-2004 04:47 PM
For a PSTN to call into Meet-me, the conference has to be up by then. For that, one IP Phone user has to go off-hook, press Meet-Me softkey and then dial the Meet-Me number. Has the Meet-me conf is up when the PNTN calls in?
01-13-2004 08:16 AM
Yes the Meet-me conf is up when somebody calls from PSTN.
When you say, "the conference has to be up by ten", we must to have 9 users in the meet-me before somebody from PSTN dial the Meet-me phone number?.
We test yesterday with two users in Meet-me conf, when other user dial from PSTN, the PSTN phone looks like connected but he isn´t in the conference, and in the same situation hardlyever the call from PSTN can be connect, with the same two users in Meet-me conf
01-13-2004 09:07 AM
First thing I would check is the Media Resource Group that your PSTN gateway is assigned to. If the PSTN gateway has no MRGL or even possibly a different MRGL than the Meet-Me Conference, you could see that symptom.
02-19-2004 11:33 AM
I'm pretty sure you can't start a MeetMe Conference from the PSTN. It has to be started from a phone that has the softkey "MeetMe".
07-01-2011 04:54 AM
Hi,
The above requirement of starting the MeetMe conference through an external phone(PSTN) along with authentication,limit of users per conference and scheduleing feature IS POSSIBLE through an application and we have done it.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide